STEL Range Agitated Pressure Pots User Guide

Note

 Do not turn off the motor while the initialization is still in progress (= while the display is blinking)  When setting the speed increasing ratio to 1.00, the speed reduction will be effective. When setting the speed increasing ratio to other than 1.00, the speed increase ratio will be effective.  When setting a longer time in the “overload alarm detection time except when holding a shaft” parameter, an overload status may continue. Repeating this condition may result in shorter service life of the motor and gearhead.  If a load exceeding the limited duty region was applied or the output shaft was locked, the “overload alarm detection time except when holding a shaft” is a maximum 5 seconds.

page 37