Momentive RTV TDS

RTV100 Series

must perform at high temperatures. Can be applied to vertical or overhead surfaces. Thin section potting, filling small surface voids, self leveling protective coating, electrical insulation where high temperature performance is required. Electrical insulation, thin section potting, self leveling protective coatings. Will flow into small crevices and hard to reach places.

FDA 21 CFR 177.2600, USDA, NSF International Std. No. 51

File 36952

RTV116 (Red)

High temperature

FDA 21 CFR 177.2600, USDA, NSF International Std. No. 51

RTV112 (White) RTV118 (Translucent)

File 36952

General purpose

These sealants were not designed for and should not be used for applications intended for permanent implantation into the human body.

These sealants are not for use in delicate electrical and electronic applications in which corrosion of copper, brass or other sensitive metals is undesirable.

Patent Status Nothing contained herein shall be construed to imply the nonexistence of any relevant patents or to constitute a permission, inducement or recommendation to practice any invention covered by any patent, without authority from the owner of the patent.

Product Safety, Handling and Storage Customers should review the latest Safety Data Sheet (SDS) and label for product safety information, safe handling instructions, personal protective equipment if necessary, emergency service contact information, and any special storage conditions required for safety. Momentive Performance Materials (MPM) maintains an around-the-clock emergency service for its products. SDS are available at www.momentive.com or, upon request, from any MPM representative. For product storage and handling procedures to maintain the product quality within our stated specifications, please review Certificates of Analysis, which are available in the Order Center. Use of other materials in conjunction with MPM products (for example, primers) may require additional precautions. Please review and follow the safety information provided by the manufacturer of such other materials.

HCD-10289 (Rev. 7/19/2016 1:42:14 PM)

Page 4 of 8