Fisnar Catalog - Engineered Dispensing Solutions

EP1305N Pail Extruder System The EP1305N is designed for dispensing 5 gallon pails of medium to high viscosity fluid. Ideal for silicones and grease. Systems are rated at 15:1 and provide a maximum of 996 psi regulated material pressure. The extruder pump body is fitted with a follower plate that seals and follows the material as the level drops to wipe the sides of the pail clean, limiting waste. The fluid is pressure-fed by reinforced hoses to a valve that is actuated by a valve controller. The EP1305 utilizes a low-pulse pump design suitable for automatic production dispensing applications, when used with a fluid regulator. These applications require a constant supply of air-free material. Air bubbles and material voids, caused by handling or decanting high viscosity fluids, are prevented. Supplied standard with 20 kg follower plate.

RESERVOIRS/PUMPS

Item Number

Description

Pump Electric 20 kg (5 Gallon 15:1 220 VAC)

EP1305N

Specifications

Features • Material delivered air free • Wipe-clean action • Air ram assist to help drive material and adjustable air ram pressure • Electrical extruder motor • Simple load mechanism for easy cleaning

500 x 400 x 1,200 mm 19.68 x 15.74 x 47.24”)

Size

Height Adjustment 755 mm min-1200 mm max (229.72” min x 47.24” max) Power Input for Sensing 220 VAC, 50 - 60 Hz, 20 watts Air Input Pressure 30 - 100 psi Maximum Output Pressure 996 psi max Fluid Viscosity Range 10,000 - 600,000 cps Minimum Volume/Stroke 0.01 cc/shot Max Operating Pressure 50 ° C Air Inlet/Fluid Outlet Size 1/4” NPT (f)

Accessories

Item Number

Description

Follower Plate for 20 kg (5 gallon pail)

EP1305WP

EP1300LPS

Low Level Sensor

651780-A3A-B

Fluid Regulator SS 3,000 psi

304 and 17-4 pH Stainless Steel, PTFE, Viton®, PEEK

Wetted Parts

Fluid Regulator Install Kit with Gauge and Fittings

EP1415K

Weight

24 kg (52.8 lb)

info@fisnar.com

100