EP8001-TDS-2022

EP8001 Concrete Repair Industrial Grade 2-Component Polyurethane Adhesive

Technical Information

50ml 1:1 Mix Ratio

Grey colour Polyurethane repair adhesive for use with concrete parts, metals and other materials. Supplied in a ready to use 50ml dual cartridge with a 1:1 ratio mix by volume. Concrete repair is a two-component polyurethane for repair ing cracks, holes and joints in concrete and for bonding components. It can also be sanded after 10 minutes and painted after 30 minutes and the final finish is so robust that it can be driven over once cured. The ability to seal joints up to 5cm wide with outstanding adhesion and its flexibility makes it suitable for both exterior and interior application use. The product is applied by means of our 50ml dual dispensing gun (ordered separately) and a static mixer nozzle (5 x mixer nozzles are bundled with each cartridge supplied). These nozzles are used on the outlet of the cartridge to ensure dynamic mixing without mess or waste. Easy to apply for outstanding results. UK made material. Supplied in a sealed pack with label and batch code.

Industrial Adhesives

Use with manual dispensing gun. Order part ABM-25M1. A compact reusable dispenser for controlled deposits. Our pneumatic dispenser guns are also available to order (products EDS408M or ADCVA-25D).

Properties

Component A Component B

Mixed

Chemical Base Cure Mechanism Full Cure Time

Polyol

MDI

Polyurethane Polyaddition

- -

- -

30 Minutes

Mix Ratio By Volume Mix Ratio By Weight

1,00 0,89 Grey

1,00 1,00

- -

Colour

Amber Liquid

Grey

Appearance

Liquid

Thixatropic 50000 mPas

Viscosity

2000 mPas

1000 mPas

Relative Density

1,08

1,20

1,14

Application Temperature +10 / +30 C

+10 / +30 C

- -

Flashpoint

> 200 C Very Low Insoluble 12 Months

> 200 C

Vapour Pressure Solubility In Water

0.000004 mmHg -

Insoluble 12 Months

- -

Shelf Life

Statements, technical informa Ɵ on and recommenda Ɵ ons contained herein are based on tests we believe to be reliable but they are not to be construed in any manner as warran Ɵ es expressed or implied. The user shall determine the suitability of the product for his intended use and the user assumes all risk and liability whatsoever in connec Ɵ on therewith.

www.adhesivedispensing.co.uk sales@adhesivedispensing.co.uk +44 (0) 1908 686660

Adhesive Dispensing Ltd

Reasons to use our dispensing components Industrial grade - certified safe for use to 100 psi. Will not break when in use under pneumatic or mechanical pressure. Certified Silicone-Free . Our components will not contaminate fluids placed when in use including specialist adhesives. Burr-free . All blunt tips are electro-polished and produced to a high precision finish. Widest range - we stock millions of parts in many different styles and an extensive range of cartridges, nozzles, mixers. Fast lead times . Most products are held in stock and available within days not weeks. Boxed - most of our tips are supplied in sealed boxes for easy identification and protection against contamination. Batch codes - all labelled with batch codes for traceability. Expert support . We recommend our products to ensure our customers receive the right solution for their application.

Visit our growing customer knowledge base for more product information, data sheets, videos and advice. https://www.adhesivedispensing.net/kb_results.asp

Adhesive Dispensing Ltd 14 Clarke Road Mount Farm, Milton Keynes Buckinghamshire, MK1 1LG, UK Tel. +44 (0) 1908 686660 Fax. +44 (0) 1908 686836 info@adhesivedispensers.co.uk www.adhesivedispensers.co.uk

© 2023 Adhesive Dispensing Ltd

www.adhesivedispensing.co.uk sales@adhesivedispensing.co.uk +44 (0) 1908 686660