EP7001 Cow Block Adhesive Data Sheet

- You can speed up the reaction by heating the bond. - After 1 – 3 minutes after the application (depending on the application temperature) it can now support the weight of the cow.

Notes

The chemical reaction begins with the mixing of the two components and is very susceptible to temperature variations :-

- HIGH TEMPRETURE = FAST SETTING - LOW TEMPRETURE = SLOWER SETTING

Whenever you use the product at a lower temperature than 20 degrees you will need to warm up the blocks and the hoof with a warm air gun and to warm the cartridges in hot water for a few minutes.

Telephone 01908 686660 Fax 01908 686836 email sales@adhesivedispensing.co.uk www.adhesivedispensing.co.uk Registered in England 6048283