DX9010 Electric Finger Switch

DX9010 Electric Finger Switch

DATA SHEET DX9010 Dispenser Finger Switch

Product Description The DX9010 is an electric finger switch for use with the TS250, TS255, TS350, TS355 & TS500R digital timed dispensers/ controllers. It replaces the foot pedal and allows the operation of the dispenser at the touch of a button. The finger switch attaches to the tip end of any size syringe barrel or some metering valves. The cord runs alongside the airline hose or fluid pipe. The button requires only 5 oz. (1.39 N) of force to actuate. Total switch travel of only 0.050” (1.3mm). Typical Applications Use this finger switch for dispenser control where operation of the foot switch is not possible or convenient. Instructions 1. Plug the pin connector to the rear of the dispenser. 2. Uncoil the cord and push the finger switch over the syringe or valve end. Tighten the screw bevel to secure. 3. Secure cord to air adapter hose or fluid line. 4. Set timer control on dispenser and press button to operate.

Technical Information

Button Force:

1.39 N 1.3mm

Switch Movement:

Construction:

Polypro, Nylon, Steel

Caution Never pull on cord when disconnecting the unit. Always hold

plug to avoid damage to cord. Health & Safety in Use

The DX9010 is safe and hygienic, reducing risk of operator contact with any materials being dispensed. This finger switch attaches easily to the syringe or valve to minimise the risk of repetitive strain injury. For high volume dispensing, we recommend a TS250 pneumatic syringe barrel dispensing system rather than manual syringe assemblies. Features  Total hand control of dispensers  Light electric button control  Compatible with TS series dispensers  Lightweight  Always available from stock  12-month warranty

The data, information and values contained in this Technical Data Sheet have been obtained by specific tests conducted in a controlled environment, and should be used for guidance purposes only. Although we believe them to be reliable and accurate, users should always conduct their own tests in their specific working conditions to ensure that the product is suitable and effective for use. It is the user’s sole responsibility to determine the suitability of the product for the application. Adhesive Dispensing Ltd cannot be held responsible for the results of procedures undertaken elsewhere, nor for the safeguarding of personnel or property, all of which is the duty of the user. Suitability of products or methods is discretionary. Therefore, warrantees or implied usage obligations should not be attributed to, and are not the responsibility of, Adhesive Dispensing Ltd. Adhesive Dispensing Ltd are not liable for any financial loss or other damages incurred by the user as a result of the use of this product. Product dimensions and design are approximate and could be subject to change, without notice.

55 Alston Drive Bradwell Abbey Milton Keynes, MK13 9HB United Kingdom

Adhesive Dispensing Ltd Sales & Service Freephone 0800 094 9058

Tel +44 (0) 1908 686660 Fax +44 (0) 1908 686836

Registered in England & Wales Reg. No 6048283 VAT No. 901 8594 21

info@adhesivedispensers.co.uk www.adhesivedispensers.co.uk

Made with FlippingBook Annual report