DB50 Debonder TDS

Technical Information

DB50

CYANOACRYLATE DEBONDER Removes Uncured & Cured Adhesive

Product Description DB50 cyanoacrylate debonder is used to clean areas of uncured adhesive and remove small areas of cured material, and soften thick portions of the cured material over time. PC68 is also suitable for debonding skin but should not be used to de bond eyelids or lips.

Physical Properties

Conversions (°C x 1.8) + 32 °F N/mm² ÷ 0.098 kg/cm² N/mm² x 145 psi MPa x 145 psi mPa·s cP

Material Base

Propylene Carbonate Base

Colour

Clear Liquid

Specific Gravity (20°C)

~1.2

Flash Point (°C)

<68

Shelf Life

12 months

Viscosity (cP)

~2

Directions For Use

For Bonded Material 1. Apply to glue line and leave for 30 seconds. Repeat if necessary. 2. Wipe away excess with a clean cloth. For Bonded Skin 1. Apply to glue line and leave for 30 seconds. Repeat if necessary.

2. Wash immediately after with warm soapy water and apply moisturising cream if necessary. Caution: Do not use to de-bond eyelids or lips. Do not use on broken or sensitive skin.

Storage Store in a cool area and out of direct sunlight.

General Information For information on safe handling of this product consult the Safety Data Sheet (SDS).

SCAN FOR SAFETY DATA SHEET

Disclaimer The data contained herein arefurnished for informational purposes only and are believed to be reliable. However, Adhesive Dispensing LtdLtd does not assume responsibility for any results obtained by persons over whose methods Adhesive Dispensing Ltd has no control. It is the user’s responsibility to determinethe suitability of Adhesive Dispensing Ltd products or any production methods mentioned herein for a particular purposea,nd to adopt such precautions as may be advisable for the protection of property and persons against any hazards that may be involved in the handling and use of any Adhesive Dispensing Ltd products. Adhesive DispensingLtd specifically disclaims all warranties express or implied, including warranties of saleability and suitability for a particular purpose arising from sale or use of Adhesive Dispensing Ltd products. Adhesive DispensingLtd further disclaims any liability for consequentialor incremental damages of any kind including lost profits.

V2 February 2023

+44 (0) 1908 686660 info@adhesivedispensers.co.uk adhesivedispensing.co.uk

Adhesive Dispensing Ltd 14 Clarke Road Milton Keynes, Bucks, MK1 1LG, UK