Cyanoacrylate Adhesive Update August 2026

Cyanoacrylate Adhesive Products Industrial cyanoacrylate adhesives available from Adhesive Dispensing Ltd

This document summarises the cyanoacrylate adhesive range listed on the Adhesive Dispensing Ltd website, including industrial, low-odour/low-bloom, metal-bonding, high-temperature and gel products. Prices shown are starting prices excluding VAT and should be checked online before ordering.

Industrial cyanoacrylate range Representative product lineup for general-purpose, low, medium and high viscosity grades.

Low odour / low bloom grades Suitable for cosmetic, electronics and applications where visible blooming should be minimised.

Metal bonding and high-temperature grades For metal, rubber, wire-tacking and higher-temperature applications.

Quick-curing cyanoacrylate gel Illustrates non-slump gel format for controlled placement on vertical or gap fi lling applications.

Product Range Product

Grade / key features

Viscosity Pack size

From price

GB06 Wicking Grade Low Viscosity Cyanoacrylate

Industrial range; rapid cure; ethyl; high performance; super-fast cure.

50g or 500g

From £6.00 exc VAT From £6.00 exc VAT From £6.00 exc VAT From £6.00 exc VAT From £6.00 exc VAT

20 cps

50g or 500g

GB01 Industrial Grade Medium Viscosity Cyanoacrylate GB16 High Viscosity Cyanoacrylate GB20 Industrial Grade Very Low Viscosity Cyanoacrylate GB95 Industrial Grade Low Viscosity Cyanoacrylate

Surface-insensitive, general purpose industrial adhesive; ethyl.

80–120 cps

High-viscosity, surface-insensitive industrial adhesive; methyl; high performance; super-fast cure. Ultra-low-viscosity, surface insensitive, general-purpose industrial adhesive; ethyl. General-purpose, low-viscosity cyanoacrylate; ethyl; high performance.

50g or 500g

1500 cps

50g or 500g

3–5 cps

50 g or 500 g

45–50 cps

GB4371 Industrial Grade High Viscosity Cyanoacrylate GB4393 Metal Bonding Low Viscosity Cyanoacrylate GB4396 Metal Bonding Medium Viscosity Cyanoacrylate GB4308 Low Odour Low Bloom Thin Cyanoacrylate GB4360 Low Odour Low Bloom Medium Cyanoacrylate GB4303 Low Odour Low Bloom Thick Cyanoacrylate GB4344 Wire Tacking High Temperature Cyanoacrylate GB4398 High Temperature Industrial Grade Cyanoacrylate GB44 Quick Curing Cyanoacrylate Adhesive Gel

Surface-insensitive, general purpose, high-viscosity adhesive; ethyl. Ultra-low-viscosity, surface insensitive metal-bonding adhesive; methyl; super-fast cure. Rubber-toughened adhesive for metal and rubber bonding; methyl; high performance. Low-odour, low-bloom, penetrating wicking grade; alkoxy-ethyl; high performance. Low-odour, low-bloom medium viscosity adhesive; alkoxy-ethyl; high performance. For critical, cosmetic and electronic applications; low odour, low bloom; alkoxy-ethyl. High-temperature, wire-tacking, low-viscosity adhesive; modi fi ed ethyl; high performance. High-temperature, wire-tacking, medium-viscosity adhesive; modi fi ed ethyl; high performance. Thixotropic quick-curing gel supplied in squeeze tubes; non slump instant adhesive.

600–650 cps

50g or 500g

From £6.00 exc VAT From £6.00 exc VAT From £6.00 exc VAT From £9.50 exc VAT From £7.50 exc VAT From £8.00 exc VAT From £8.00 exc VAT

50g or 500g

3 cps

50g or 500g

125 cps

50g or 500g

3–5 cps

50g or 500g

120 cps

50g or 500g

1200 cps

50g or 500g

70 cps

50g or 500g

From £25.00 exc VAT

700 cps

20g tube

From £3.95 exc VAT

Gel

Selection Guide • For very fi ne wicking or capillary applications: choose very low or low viscosity grades such as GB20, GB4393 or GB4308. • For general-purpose bonding: select medium viscosity GB01 or low viscosity GB95 depending on fl ow requirements. • For larger gaps or vertical surfaces: use higher viscosity grades such as GB16, GB4371, GB4303, GB44 or GB09. • For cosmetic, electronic or low-bloom applications: consider the low odour / low bloom grades GB4308, GB4360 or GB4303. • For metal, rubber or higher-temperature applications: review GB4393, GB4396, GB4344 or GB4398.

Ordering and Support For the latest pricing, availability, datasheets and application advice, visit the cyanoacrylates product page or contact Adhesive Dispensing Ltd sales on 01908 686660.

Reasons to use our dispensing components Industrial grade - certified safe for use to 025 psi. Will not break when in use under pneumatic or mechanical pressure. Certified Silicone-Free . Our components will not contaminate fluids placed when in use including specialist adhesives. Burr-free . All blunt tips are electro-polished and produced to a high precision finish. Widest range - we stock millions of parts in many different styles and an extensive range of cartridges, nozzles, mixers. Fast lead times . Most products are held in stock and available within days not weeks. Boxed - most of our tips are supplied in sealed boxes for easy identification and protection against contamination. Batch codes - all labelled with batch codes for traceability. Expert support . We recommend our products to ensure our customers receive the right solution for their application.

Visit our growing customer tech knowledge base for more product information, data sheets, videos and advice. https://www.adhesivedispensing.net/kb_results.asp