BVX-250-Fume-Extraction-System-User-Guide-EN

BVX-250 Series Fume Extraction System User Guide

REPLACE PRE-FILTER

REMOVE AND REPLACE THE PREFILTER

PULL PREFILTER TRAY OUT

PUSH TRAY BACK INTO UNIT TO ENSURE IT IS FULLY SEALED

REPLACE MAIN FILTER

PULL OUT THE FILTER HOLDER WITH THE FILTER ATTACHED

STEP 1

STEP 2

ROTATE THE MAIN FILTER HOLDER 90 DEGREES COUNTER CLOCKWISE

STEP 5

STEP 3

STEP 4

LIFT RELEASE LATCH UP FULLY AND ROTATE FILTER ELEMENT

PLACE NEW FILTER ELEMENT ON HOLDER AND ROTATE UNTIL FULLY STOPPED

PULL FILTER ELEMENT OFF

STEP 7

STEP 6

STEP 8

RETURN FILTER HOLDER & FILTER TO UNIT

PUSH LATCH BACK DOWN TO ENSURE FILTER ELEMENT IS LOCKED IN PLACE

16 ROTATE FILTER HOLDER 90 DEGREES TO LOCK IN PLACE