Air-powered dispensers with adjustable timers to make repeat deposits of watery liquids to thick pastes. Set the air pressure to suit flow rate and fluid viscosity, set the timer from small spot to larger shot. Use vacuum to prevent drips of watery liquids. Press the foot switch to activate, hold the barrel like a pen. Fast shots with no mess, waste or adhesive fumes.
Bench top, air-powered dispensers for most adhesive and paste applications. Featuring an adjustable 0-100 psi air regulator for setting flow rates when dispensing most low, medium and high viscosity materials. A low pressure 0-15 psi version is available for dispensing very watery liquids, cyanoacrylates or solvents. All air powered dispensers use a three way air valve for quick shut-off or air to prevent fluid oozing from the tip when the foot pedal is released. Fast shut-off each time. The operator controls deposit output using steady mode for making beads or potting or they use an adjustable timer for making repeated dots. Dispensers are suited to the controlled application of fluids, adhesives, RTVs, grease, gels, epoxies, silicones, pastes, inks, primers, potting compounds, solder pastes fluxes and so many other assembly fluids. Supplied ready to use with accessories, barrels and tips.
ADL-300 Syringe Timed Air Rotary Table Dispenser with Vacuum Suck-Back
Air Output: Air Input:
1 to 30 Seconds (Adjustable)
Vertical Travel: Rotation Speed:
Up to 50mm 0-300 RPM
215 x 310 x 85mm (base unit)
Low Cost Automation
The ADL-300 is bench top rotary dispensing station for applying adhesives, fluids, silicones and pastes to cir- cular components under 150mm in diameter. This rotary table provides an efficient method of dispensing a pattern onto circular products. The tilting Z-axis allows controlled rotary dispensing on an angle if required. The ADL-300 dispenses adhesives, silicones, grease and lubricants and is fully adjustable in rotation speed, circle diameter and dispensing time. Dispense from 30cc or 55cc sized barrels mounted on the Z-axis. The Z- axis tilt is easily adjusted to dispense either on a vertical wall within a cylindrical part or on an outside wall. The system will spin the part, index down and dispense to a required time. The head then indexes back into position after fluid is applied. The speed of index can be adjusted. A built-in vacuum suck-back is designed for watery liquids. This is a stand alone dispensing station requiring only power and air. Supplied with 30cc and 55cc barrels, pistons, caps as well as a full precision tip kit. (The circular mounting plate is made by customer to suit products).