Adhesive Dispensing Products Catalogue

Adhesives

Threadlocker Anaerobic Adhesives

Anaerobic sealants adhesives are single component materials that cure by the presence of metal and the absence of air. When both condi Ɵ ons are met anaerobic adhesives form a tough, durable polymer providing total contact between the two surfaces, resul Ɵ ng in a vibra Ɵ on and leak ‐ proof assembly.

Low Strength Screwlocker

Mid Strength Screwlocker

High Strength Threadlock

Low Viscosity Studlocker

Colour: Green Viscosity: 500 cps

Colour: Purple Viscosity: 1,200 ‐ 1,500 cps Temp. Range:  ‐ 50 to 150 C Fixture Time: < 15 mins @ 20 Full Cure: 24 Hours @ 20 Size Part Code 50ml A02 ‐ 50 250ml A02 ‐ 250 10ml A02 ‐ 10

Colour: Blue Viscosity: 1,200 ‐ 1,500 cps Temp. Range:  ‐ 50 to 150 C Fixture Time: 10mins @ 20 Full Cure: 24 Hours @ 20 Size Part Code 50ml A03 ‐ 50 250ml A03 ‐ 250 10ml A03 ‐ 10

Colour: Red Viscosity: 400 ‐ 600 cps Temp. Range:  ‐ 54 to 150 C Fixture Time: 15mins @ 20 Full Cure: 24 Hours @ 20

Temp. Range:  ‐ 50 to 150 C Fixture Time: 15mins @ 20 Full Cure: 24 Hours @ 20 Size Part Code 50ml A05 ‐ 50 250ml A05 ‐ 250 10ml A05 ‐ 10

Size

Part Code

50ml A06 ‐ 50 250ml A06 ‐ 250 10ml A06 ‐ 10

High Viscosity Threadlock

Fast Cure Nutlocker

High Strength Retainer

Mid Strength Retainer

Colour: Red Viscosity: 5,000 cps

Colour: Blue Viscosity: 2,000 cps

Colour: Green Viscosity: 7,000 cps

Colour: Yellow Viscosity: 1,500 cps

Temp. Range:  ‐ 50 to 150 C Fix Time: 15 ‐ 30mins @ 20 Full Cure: 24 Hours @ 20

Temp. Range:  ‐ 50 to 150 C Fixture Time: 10mins @ 20 Full Cure: 24 Hours @ 20

Temp. Range:  ‐ 50 to 150 C Fixture Time: 20mins @ 20 Full Cure: 24 Hours @ 20 Size Part Code

Temp. Range:  ‐ 50 to 150 C Fixture Time: 10mins @ 20 Full Cure: 24 Hours @ 20 Size Part Code

Size

Part Code

Size

Part Code

50ml A07 ‐ 50 250ml A07 ‐ 250 10ml A07 ‐ 10

50ml A11 ‐ 50 250ml A11 ‐ 250 10ml A11 ‐ 10

50ml A14 ‐ 50 250ml A14 ‐ 250 10ml A14 ‐ 10

50ml A08 ‐ 50 250ml A08 ‐ 250 10ml A08 ‐ 10

Low Viscosity Retainer

Penetra Ɵ ng Threadlock Colour: Green Viscosity: 2,500 cps Temp. Range:  ‐ 50 to 200 C Fixture Time: 15mins @ 20 Full Cure: 24 Hours @ 20 Size Part Code 50ml A90 ‐ 50 250ml A90 ‐ 250 10ml A90 ‐ 10

High Strength Retainer

High Temp Gasket Maker

Colour: Green Viscosity: 150 cps

Colour: Green Viscosity: 500 cps

Colour: Red Viscosity: 2,500 cps

Temp. Range:  ‐ 50 to 200 C Fixture Time: 15mins @ 20 Full Cure: 24 Hours @ 20

Temp. Range:  ‐ 50 to 150 C Fixture Time: 15mins @ 20 Full Cure: 24 Hours @ 20

Temp. Range:  ‐ 54 to 200 C Fixture Time: 120mins @ 20 Full Cure: 24 Hours @ 20

Size

Part Code

Size

Part Code

Size

Part Code

Industrial Adhesives

50ml A01 ‐ 50 250ml A01 ‐ 250 10ml A01 ‐ 10

50ml A48 ‐ 50 250ml A48 ‐ 250 10ml A48 ‐ 10

50ml G10 ‐ 50 250ml G10 ‐ 250 10ml G10 ‐ 10

High Viscosity Gasket

Hydraulic Thread Sealant

High Temp Pipe Sealant Colour: White Viscosity: 50,000 cps Temp. Range:  ‐ 50 to 200 C Fixture Time: 75 mins @ 20 Full Cure: 24 Hours @ 20 Size Part Code 50ml P72 ‐ 50 250ml P72 ‐ 250 10ml P72 ‐ 10

Fast Cure Pipe Sealant

Colour: Orange Viscosity: 10,000 cps

Colour: Brown Viscosity: 2,000 cps

Colour: Yellow Viscosity: 100,000 cps Temp. Range:  ‐ 50 to 150 C Fixture Time: 30 mins @ 20 Full Cure: 24 Hours @ 20

Temp. Range:  ‐ 50 to 150 C Fixture Time: 60mins @ 20 Full Cure: 24 Hours @ 20

Temp. Range:  ‐ 50 to 150 C Fixture Time: 60 mins @ 20 Full Cure: 24 Hours @ 20 Size Part Code 50ml H42 ‐ 50 250ml H42 ‐ 250 10ml H42 ‐ 10

Size

Part Code

Size

Part Code

50ml G74 ‐ 50 250ml G74 ‐ 250 10ml G74 ‐ 10

50ml P77 ‐ 50 250ml P77 ‐ 250 10ml P77 ‐ 10

This accomplished range of anaerobics contains thread ‐ lockers, thread ‐ sealers, retainers and pipe ‐ sealants. The word "anaerobic" means without air which explains the primary cure mechanism of this group of adhesives. An anaerobic adhesive is a single part adhesive that cures or polymerizes when deprived of oxygen. Anaerobics are designed to lock and seal metal components and fasteners and are available in a range of thicknesses, from thin water to a heavy paste. The use of primers will signi fi cantly reduce the fi x Ɵ mes. For controlled dispensing of these products, use our Ɵ med syringe dispensers, meter ‐ ing valves, controllers and pressure pots.

90

www.adhesivedispensing.co.uk sales@adhesivedispensing.co.uk +44 (0) 1908 686660

Made with FlippingBook Ebook Creator