Adhesive Dispensing Products Catalogue

Syringe barrel dispenser accessories

Dispenser Barrel Stands

Dispenser Air Filters

All dispensers are shipped with a basic barrel stand that can also be ordered separately. Fits 3cc, 5cc, 10cc, 30cc, 55cc size barrels. Type Part Code Metal/Plas Ɵ c SH300 Metal Only TS100

Use a 5 ‐ micron air fi lter on the feed into the dispenser to protect, reduce moisture and small contaminants. Standard fi lter or with a regulator and gauge. 1/4” Thread.

Type

Part Code

Standard Filter TSD800 ‐ 6EL With Regulator TSD800 ‐ 6FR

Syringe Barrel Stand Assembly

Syringe Barrel Storage Racks

Syringe barrel bench stand for all barrel size for hands free dispensing. The barrel is locked at the luer outlet end and can be adjusted for height and angle.

Filled syringe barrels can be stored in these bench racks.

Type Stand

Part Code

560021

Type Part Code 3cc, 5cc, 10cc, 30cc, 55cc SYR19B 3cc Plas Ɵ c Rack SR03 ‐ 90W 5cc Plas Ɵ c Rack SR05 ‐ 60W 10cc Plas Ɵ c Rack SR10 ‐ 40W 30cc/55cc Plas Ɵ c Rack SR30 ‐ 24W

Syringe Barrel Stand Assembly

Syringe barrel bench stand for 30cc and 55cc barrels for hands free dispensing. The barrel is held in place by the body and can be adjusted for height and angle. Type Part Code Stand AD4000 ‐ 30CC

Cartridge Retainer with Stand Assembly

Cartridge retainer bench stand for hands free dispensing. Can be adjusted for height and angle. Supplied with metal retainer, cap and air hose. For Techcon and Semco cartridges. Size Part Code 2.5 oz TS918 ‐ 2 6 oz TS918 ‐ 6 8 oz TS918 ‐ 8 10 oz TS918 ‐ 10 12 oz TS918 ‐ 12 20 oz TS918 ‐ 20

Syringe Dispensing

Dispense Valve Stand Assemblies

Valve bench stands for hands free dispensing. Can be adjusted for height and angle. Supplied with metal base, upright rod, clamp. For a range of dispensing valve types.

For Valves

Part Code TS918 ‐ 1212 TS918 ‐ 5622 TS918 ‐ 5420 TS918 ‐ 941A TS918 ‐ 5540 TS918 ‐ 5000

Pinch

Diaphragm

Needle Spool Spray Auger

Syringe Barrel Storage Racks

General purpose bench stand for hands free dispensing. Can be adjusted for height and angle. Supplied with metal base, rod, and clamp. Use for syringe barrels, cartridges, valves. Low cost solu Ɵ on.

Cartridge Retainer Stand

Cartridge retainer stand for hands free dispensing. Adjustable for height and angle. Use with 2.5oz, 6oz, 8oz and 12oz size aluminium cartridge retainers. Type Part Code Stand AD4000 ‐ GSOC

Type Stand

Part Code STD0140

Produc Ɵ on Master Stand and Brackets

Benchtop stands, brackets, rods, clamps and fi ƫ ngs for use with cartridge retainers syringe barrels and dispense valves.

Part Code 918 ‐ 033 ‐ 000 918 ‐ 000 ‐ 012 918 ‐ 000 ‐ 011 918 ‐ 000 ‐ 013 918 ‐ 110 ‐ 004 918 ‐ 000 ‐ 039 918 ‐ 000 ‐ 007 918 ‐ 000 ‐ 016 918 ‐ 000 ‐ 048 1212 ‐ 000 ‐ 006 918 ‐ 000 ‐ 009 918 ‐ 000 ‐ 002

Descrip Ɵ on

Used as an alterna Ɵ ve to the foot switch on a dispenser. For the full range of dispensers. Dispenser Electric Finger Switches

Base Stand & Upright Rod Assembly Rod Clamp Assembly Syringe Bracket Assembly TS941/TS941 Valve Bracket 310ml (10oz) Cartridge Bracket 20oz/ 32oz Cartridge Bracket 2.5, 6, 8, 12oz Cartridge Bracket

For Dispenser TS250/ TS350 TS250/ TS350 1000T, ADL810 TS9150, ADL100 1000T, ADL810 TS9150, ADL100

Barrel Sizes

Part Code DX9010 AD9012 ADL9050 ADL9060 AD9010 AD9065

All

30cc, 55cc

All All

Spool Valve Bracket Valve Moun Ɵ ng Bracket

30cc, 55cc 30cc, 55cc

Valve Rod 4” Long Stainless Steel Moun Ɵ ng Rod 6” Long Stainless Steel Produc Ɵ on Master Air Hose 5 Ō . Long

7

www.adhesivedispensing.co.uk sales@adhesivedispensing.co.uk +44 (0) 1908 686660