Adhesive Dispensing Products Catalogue

Single component pneuma Ɵ c cartridge dispensing

32oz Pneuma Ɵ c Cartridge Dispensing Gun

32oz Sachet Sealant Gun

Rod driven gun for 1/4 gallon, 32oz cartridges. Provides more power for higher viscosity materials. Adjustable air regulator sets the fl ow rate. Reverse bu Ʃ on to retract rod.

Powerful pneuma Ɵ c sealant gun with adjustable air regulator. For 1/4 gallon, 32oz cartridges. An air dump valve stops fl ow immediately. Use with sealants, adhesives, PUs, resins.

Material: Pressure:

Steel

100 PSI

Thrust:

1.45kN Medium

Material: Pressure:

Steel

Cartridge Size: 32oz Weight: 2.15kg

100 PSI Max. 4.50kN High

Thrust:

Size

Part Code

Size 32oz

Part Code AD710AL ‐ 30

Cartridge Size: 32oz Weight: 2.45kg

32oz

AD725AL ‐ 30

400ml/600ml Sachet Sealant Gun

20oz/ 24oz Sachet Sealant Gun

A steel body pneuma Ɵ c applicator gun for 400ml and 600ml sachets and bulk. Easy operated lever. For low to medium viscosity materials.

A steel body pneuma Ɵ c applicator gun for 10oz, 20oz and 24oz sachet bulk materials. Easy operated lever. For low to medium viscosity materials.

Material: Pressure:

Steel

100 PSI Max. 1.45kN Medium

Thrust:

Cartridge Size: 10, 20, 24oz Weight: 2.26kg

Material: Pressure:

Steel, Aluminium 100 PSI Max. 1.60kN Medium

Thrust:

Single Cartridge Dispensing

Size

Part Code

Size

Part Code

Cartridge Sizes: 400, 600ml Weight: 1.68kg

400/600ml T20

10, 20, 32oz

AD724

32oz Sachet Sealant Gun

Use with squeeze tubes only. 5oz Pneuma Ɵ c Tube Dispensing Gun A pneuma Ɵ c squeeze tube applicator gun. For squeeze tubes up to 5 ounce in size. Includes airline hose. Material: Nylon Pressure: 60 PSI Max. Thrust: 0.75kN Low Cartridge Size: 5oz Weight: 0.95kg Size Part Code 5oz TS910

A steel body pneuma Ɵ c applicator gun for 32oz sachet bulk materials. For low to medium viscosity materials.

Material: Pressure:

Steel

100 PSI Max. 1.45kN Medium

Thrust:

Size 32oz

Part Code

Cartridge Size: 32oz Weight: 2.32kg

AD732

Industrial Airline Hose Assemblies for Pneuma Ɵ c Guns

Industrial airline hoses for use with pneuma Ɵ c applicator guns. High pressure safe to 100 PSI. Flexible and fully reinforced for safe use in any assembly environment. Contact us with the thread size of the gun being used if support is required.

Type

Part Code 1000 ‐ 12 AD1000 ‐ 30 AD1000 ‐ 30C AD1000 ‐ 15M AD1000 ‐ 60 AD1000 ‐ 10M

1/4” Thread, 10 Ō  Long to 1/4” Connect 1/4” Thread, 30 Ō  Long to 1/4” Connect 1/4” Thread, 30 Ō  Long Coiled to 1/4” Connect 1/4” Thread, 15m Long to 1/4” Connect 1/4” Thread, 60 Ō  Long to 1/4” Connect B ‐ Nut Fi ƫ ng, 5 Ō  Long to FTP Connect B ‐ Nut Fi ƫ ng, 10 Ō  Long to FTP Connect 1/4” Thread, 10m Long to 1/4” Connect B ‐ Nut Fi ƫ ng, 5 Ō  Long to Hansen Connect B ‐ Nut Fi ƫ ng, 10 Ō  Long to Hansen Connect B ‐ Nut Fi ƫ ng, 5 Ō  Long to Schrader Connect B ‐ Nut Fi ƫ ng, 10 Ō  Long to Schrader Connect B ‐ Nut Fi ƫ ng, 5 Ō  Long to ARO Connect B ‐ Nut Fi ƫ ng, 10 Ō  Long to ARO Connect

231876 232649 280000 280001 280006 280007 280012 280013

Use a regulator to set fl ow run for pneuma Ɵ c applicator guns that do not feature this level of control. And use an air fi lter to ensure moisture and par Ɵ cles are kept away from the applicator gun and materials.

Type

Part Code TSD800 ‐ 6FR TSD800 ‐ 6EL

Air Filter Regulator, 100 PSI, 1/4” Thread Air Filter Only, 100 PSI, 1/4” Thread

33

www.adhesivedispensing.co.uk sales@adhesivedispensing.co.uk +44 (0) 1908 686660

Made with FlippingBook Ebook Creator