Adhesive Dispensing Products Catalogue

Two component material valves

Dual Component Epoxy Dispensing Valve

Stainless steel double air ac Ɵ vated dispense valve for mixing two part materials such Part A and Part B are fed under pres ‐ sure to the valve, it delivers them into the sta Ɵ c mixer nozzle where they are mixed. This valve mixes ra Ɵ o 1:1 ra Ɵ o only. Typical Applica Ɵ ons: Epoxies, polyurethanes, po ƫ ng materials, doming resins.

Speci fi ca Ɵ ons Mix Ratio: Minimum Shot Size:

Part Code

We Ʃ ed Parts

1:1

Features • Consistent deposits • Accurate mixing • Posi Ɵ ve shut ‐ o ff  • Adjustable fl ow control

ADH3242AB1

304 Stainless Steel

0.01ml/ cc

L x W

115mm x 42mm

Weight:

618g

Fluid Inlet Port: Fluid Outlet Ports: Activation Pressure: Max Fluid Pressure: Viscosity Range:

1/8" NPT female Static Mixer Nozzle >70 psi (4.8bar) Min

100 psi (6.9bar)

Use with VCE1195 double Controller

1-1000cps

Wetted Parts:

304 SS, Aluminium

Dual Component Epoxy Dispensing Valve

Stainless steel double air ac Ɵ vated dispense valve for mixing two part materials . Part A and Part B are fed under pressure to the valve, it delivers them into the sta Ɵ c mixer nozzle where they are mixed. This valve mixes ra Ɵ os up to 3:1  ‐ adjustable.

Speci fi ca Ɵ ons Mix Ratio: Minimum Shot Size: Typical Applica Ɵ ons: Epoxies, polyurethanes, po ƫ ng materials, doming resins. Features • Consistent deposits <3:1 0.01ml/ cc

Part Code

We Ʃ ed Parts

ADH3242AB2

304 Stainless Steel

• Accurate mixing • Posi Ɵ ve shut ‐ o ff  • Adjustable fl ow control

L x W

115mm x 42mm

Dispensing Valves

Weight:

618g

Fluid Inlet Port: Fluid Outlet Ports: Activation Pressure: Max Fluid Pressure: Viscosity Range:

1/8" NPT female Static Mixer Nozzle >70 psi (4.8bar) Min

100 psi (6.9bar)

Use with VCE1195 double Controller

1-1000cps

Wetted Parts:

304 SS, Aluminium

Dual Component Epoxy Dispensing Valve

Stainless steel double air ac Ɵ vated dispense valve for mixing two part materials. Part A and Part B are fed under pressure to the valve, into the sta Ɵ c mixer nozzle where they are mixed. This valve mixes ra Ɵ os 2:1 or under  ‐ adjustable.

Typical Applica Ɵ ons: Epoxies, polyurethanes, po ƫ ng materials, doming resins. Speci fi ca Ɵ ons Mix Ratio: < 2:1 Minimum Shot Size: 0.01ml/ cc L x W 160mm x 40mm Weight: 233g Fluid Inlet Port: 1/8" NPT female Fluid Outlet Ports: Static Mixer Nozzle Activation Pressure: >70 psi (4.8bar) Min Max Fluid Pressure: 100 psi (6.9bar) Viscosity Range: 1-2000cps Wetted Parts: 304 SS, Aluminium Features • Consistent deposits • Accurate mixing • Posi Ɵ ve shut ‐ o ff  • Adjustable fl ow control Use with VCE1195 double Controller

Part Code We Ʃ ed Parts ADH1919AB1 304 Stainless Steel

VCE1195 4 ‐ Way Double Ac Ɵ ng Valve Controller

Features • Timed or Con Ɵ nuous • Foot pedal or Robot • Posi Ɵ ve shut ‐ o ff  • Adjustable Ɵ mer control The VC1195N is a 4 ‐ way valve controller that can be used to control one or two valves simultaneously. The controller is suitable for dual component valves. The valve controller provides a con Ɵ nuous “valve ‐ o ff ” state and remains in this mode un Ɵ l a signal is received to switch to “valve ‐ on” mode when the footswitch is pressed or used with a robot to control the opera Ɵ on. When the Ɵ mer is selected, a momentary pulse will ac Ɵ vate the Ɵ mer to open the valve for a programmed period and then close the valve automa Ɵ cally. Speci fi ca Ɵ ons W x D x H: 266 x 210 x 72mm Weight: 1.92kg Activation Pressure: 70 psi (4.8bar) Min Max Fluid Pressure: 100 psi (6.9bar) Timer Tolerance: +/- 0.001% Part Code Type VCE1195N 220V AC VC1195A 110V AC

71

www.adhesivedispensing.co.uk sales@adhesivedispensing.co.uk +44 (0) 1908 686660