Adhesive Dispensing Products Catalogue

Metering valves

Motor Driven DMP Auger Rotary Valve

Disposable Material Path (DMP) valve uses a feed screw for easy maintenance and reliable dispensing. Feed screw made of Delrin, for use with two ‐ compound and UV pastes. Auger valve technology for the highest repeatability. With 6, 8 or 16 pitch screw pitch size. Use with TS570R digital controller. Feed material from syringe barrel or cartridge reservoir.

Typical Applica Ɵ ons: Solder paste, SMA, Epoxy, UV cure.

Part Code

Type

Length: Width:

149.4mm 39.6mm

TS5000DMP ‐ DCX

DMP Valve Boxed Fixed Collar 6 Pitch Insert Red Fixed Collar 6 Pitch Insert Red Rota Ɵ ng Collar 8 Pitch Insert Black Fixed Collar 8 Pitch Insert Red Rota Ɵ ng Collar 16 Pitch Insert Red Fixed Collar 16 Pitch Insert Red Rota Ɵ ng Collar

DMP6 ‐ 10 DMP6R ‐ 10 DMP8 ‐ 10 DMP8R ‐ 10 DMP16 ‐ 10 DMP16R ‐ 10

Max Pressure: 30psi Viscosity:

30k-1 Million cps

Inlet:

Female Luer Male Luer

Outlet:

Wetted Parts: Delrin

Use with TS570R Smart Controller

Motor Driven Applicator

Motor Driven IMP Auger Rotary Valve

Uses a feed screw (auger) to dispense fl uid with a rotary displacement ac Ɵ on, allowing ultra ‐ precise control of the dispensing process. Modular design allows quick easy replacement of the feed screw/chamber cartridge assembly without removing the valve from the machine. Valve cartridge can be interchanged to use with TS5000DMP feed screw inserts. Available in 3 choices of feed screw sizes (16 ‐ pitch, 8 ‐ pitch and high output 8 ‐ pitch), all made of precision hardened tool steel. Typical Applica Ɵ ons: Solder paste, SMA, Epoxy, UV adhesive, Heat Sink.

Part Code TS7000 ‐ 16 TS7000 ‐ 8 TS7000 ‐ 8HO TS7000E ‐ 16 TS7000E ‐ 8

Type

Length: Width:

172.2mm

IMP Valve 16 Pitch IMP Valve 8 Pitch

54mm Max Pressure: 30psi Viscosity:

30k-1.3 Million cps

IMP Valve 8 Pitch, High Output IMP Valve 16 Pitch, Encoder

Inlet:

Female Luer

Outlet: Male Luer Wetted Parts: Hardened Steel

IMP Valve 8 Pitch, Encoder TS7000E ‐ 8HO IMP Valve 8 Pitch, Encoder, High

Use with TS570R Smart Controller

Motor Driven Applicator

Dispensing Valves

Posi Ɵ ve Displacement PC Pump

The TS8100 Series Posi Ɵ ve Displacement Pump is a con Ɵ nuously volumetric dispense pump based on Progressive Cavity (PC) technology. The pump is designed to dispense a wide range of fl uids, from low viscosity coa Ɵ ngs to high viscosity greases. Due to the PC Pumps unique dispensing technology, accuracy and repeatability of ± 1% is achievable. Typical Applica Ɵ ons: Solder paste, SMA, Epoxy, UV adhesive, Heat Sink, Flux. Part Code Type TS8100 ‐ 100 PC Pump Small Shot Range TS8100 ‐ 200 PC Pump Mid Shot Range TS8100 ‐ 300 PC Pump Large Shot Range Length: 205mm Width: 34mm Max Pressure: 30psi Viscosity: 1cps-300k

Motor Driven Applicator

Use with TS580R Smart Controller

68

www.adhesivedispensing.co.uk sales@adhesivedispensing.co.uk +44 (0) 1908 686660

Made with FlippingBook flipbook maker