Adhesive Dispensing Products Catalogue

Syringe barrel dispensers

Reusable Syringe Barrel Hand Plunger Rods

10cc Syringe Hand Applicator

Where an applica Ɵ on requires hand operated dispensing, the TS Series Rods provide improved control, cleaner and easier opera Ɵ on. Unlike hypodermic syringes with Ɵ ght fi ƫ ng rubber pistons, the TS plunger rods use the same plas Ɵ c pistons and barrels as used on our air ‐ powered dispensers for very li Ʃ le e ff ort to apply thick fl uids. And the unique design means instant cut ‐ o ff when pressure is released. No drips or ooze. Available as rod or with barrel, piston and assorted Ɵ p kits. Material: Polypro, Nylon Colour: Black/ Grey Barrel Sizes: 3cc, 5cc, 10cc, 30cc Length: 90mm to 125mm Weight: 0.02kg

Manual micro ‐ dot applicator for 10cc sized syringe barrels. Allows a fi xed deposit size by adjus Ɵ ng the micro ‐ screw. When the lever is pressed, the rod moves a fi xed distance. Available as applicator only or with full component kit. Can be used with liquids including UV cure adhesives.

Size 3cc 5cc 10cc 30cc

Plunger TS703HP TS705HP TS710HP TS730HP

With Kit

TS703HP ‐ KIT TS705HP ‐ KIT TS710HP ‐ KIT TS730HP ‐ KIT

Material: Colour: Sizes: Length: Weight:

Aluminium

Black

10cc Only

Reusable Aluminium Hand Plunger Rods

195mm 0.100kg

A simple reusable aluminium plunger rod for use with most syringe barrels. The rod is placed into the top of the barrel and used to push against the wiper piston. Easy use, easy to clean single piece product. Useful device for low volume applica Ɵ ons, repair work or fi eld work.

Size 10cc

Plunger With Kit

HLD ‐ 10

HLD ‐ 10 ‐ KIT

Material: Colour:

Aluminium

TSI Series Syringe Guns

Blue Barrel Sizes: 3cc, 5cc, 10cc, 30cc Length: 95mm to 130mm Weight: 0.025kg

Blue colour body syringe guns from Techcon Systems Inc. Same speci fi ca Ɵ on as red version.

Size 3cc 5cc 10cc 30cc

Plunger ADQHP3 ADQHP5 ADQHP10 ADQHP30

With Kit

ADQHP3 ‐ KIT ADQHP5 ‐ KIT ADQHP10 ‐ KIT ADQHP30 ‐ KIT

TS Series Syringe Guns

Manual hand lever dispensers for the controlled deposits of epoxies, gels, silicones, sealants, RTV's, greases, pastes and adhesives. Guns are robust enough for regular use yet portable and are suited for low volume assembly work, repair work or fi eld work. Available as the applicator only or with component kits. Use with all standard barrels.

Material: Thrust: Sizes: Length: Weight: Force :

Glass Filled Nylon

Syringe Dispensing

1.2kN Max.

10cc, 30cc, 55cc 235mm to 295mm

Material: Thrust:

Glass Filled Nylon

1.2kN Max. Barrel Sizes: 10cc, 30cc, 55cc Length: 235mm to 295mm Weight: 0.15kg Force Ratio: 7:1

0.15kg

7:1

Size 10cc 30cc 55cc

Gun

With Kit

TS710SG ‐ TSI TS730SG ‐ TSI TS755SG ‐ TSI

TS710SG ‐ TSI ‐ KIT TS730SG ‐ TSI ‐ KIT TS755SG ‐ TSI ‐ KIT

Size 10cc 30cc 55cc

Gun

With Kit

TS710SG TS710SG ‐ KIT TS730SG TS730SG ‐ KIT TS755SG TS755SG ‐ KIT

Syringe Gun Spares

Replacement plunger rods for the TS and TSI series syringe guns. And rubber O ‐ rings for both guns supplied in packs of (10).

Adjustable Shot Syringe Gun

These guns have an adjustable pin allowing the user to change the distance the rod moves to adjust the shot size. A metal rod with rubber end and O ‐ ring seal. Barrels twist onto the fl ange fi ƫ ng for a secure a Ʃ achment. Easy rod retrac Ɵ on for barrel changing.

Material: Thrust:

Polypro, Nylon 1.20kN Max.

Material: EPR O-Ring Colour: Black Mfg.: Techcon Pack: 10

Material: Nylon (Rod) Colour: Grey Mfg.: ADL Pack: 1

Barrel Sizes: 30cc Only Length: 215mm Weight: 0.14kg Force Ratio: 7:1

Size 10cc 30cc 55cc

Rod

O ‐ ring P3017EPK P3018EPK P3018EPK

Size

Gun

With Kit DG30 ‐ KIT

71000ROD 73000ROD 75000ROD

30cc DG30

4

www.adhesivedispensing.co.uk sales@adhesivedispensing.co.uk +44 (0) 1908 686660