Adhesive Dispensing Ltd Products Catalogue 2020

Jet valves

Non Contact Jet Valve TS9200D

Jet Tech The TS9200D Jet Tech is a non ‐ contact dispense valve capable of je ƫ ng fl uid viscosi Ɵ es to 400,000 Cps. Jet Tech o ff ers a fast je ƫ ng ac Ɵ on producing hundreds of precise droplets in less than one second. 300 drops/sec con Ɵ n ‐ uous duty. 50% increase in throughput over conven Ɵ onal Jet valves. Simple to clean – only 2 parts contact the fl uid. Conven Ɵ onal Jet valves can have as many as 8 parts requiring cleaning. With only two parts to clean, cleaning the TS9200D takes only minutes and there is no need to remove the Jet valve from the robot. A diaphragm and nozzle plate can be installed immediately without the need to carefully calibrate the Jet valve saving valuable produc Ɵ on Ɵ me and no special o ff‐ line cleaner is required. The TS9200D generates a very high drop velocity allowing a wide range of fl uids and applica Ɵ ons. In addi Ɵ on, the drop velocity can be easily changed to help fi ne tune the process and achieve a high process capability and wide process window. The advanced electronic drive provides power when required and reduces power when idle. The internal air fl ow cools the jet body so it runs cool even during high ‐ speed, con Ɵ nuous opera Ɵ on. The integral nozzle heater heats only the fl uid in the nozzle plate and is thermally isolated from the jet body. Its easy to integrate – In combina Ɵ on with the standalone TS920 controller, a single trigger line is all that is needed to start dispensing complex pro ‐ grams. Typical Applica Ɵ ons Je ƫ ng silver epoxies for die bonding processes, Je ƫ ng silicone phosphor in the LED assembly process, Je ƫ ng under ‐ fi ll in micro ‐ electronic package appli ‐ ca Ɵ ons on PCBA, Je ƫ ng micro dots of UV adhesive in medical device applica ‐ Ɵ ons.

Dispensing Valves

Speci fi ca Ɵ ons

Width: Depth: Height: Weight: Speed:

50.8mm 93.8mm 88.9mm


Up to 300Hz Continuous Duty

Syringe Capacity: Minimum Shot Size: Viscosity Range:

5cc, 10cc, 30cc, 55cc

Key Features • Non contact Je ƫ ng technology • Accurate and precise dispensing • High speed, up 300 drops/sec • Repeatable drop size as small as 10 nl • Jet fl uid up to 400K Cps • No fl uid seals to clean or replace • Integral heater with minimal fl uid heated • Quick and simple setup • Low total cost of ownership


1k to 400k Cps.

Fluid Pressure: Jet Pressure:

40 PSI

35 PSI to 70 PSI

Operating Temperature:10 to 50°C

Part Code


TS9200D ‐ 125E TS9200D ‐ 150E TS9200D ‐ 200E TS9200D ‐ 125S TS9200D ‐ 150S TS9200D ‐ 200S

Jet Valve EPDM Diaphragm, 125 μ m Nozzle Jet Valve EPDM Diaphragm, 150 μ m Nozzle Jet Valve EPDM Diaphragm, 200 μ m Nozzle Jet Valve Silicone Diaphragm, 125 μ m Nozzle Jet Valve Silicone Diaphragm, 150 μ m Nozzle Jet Valve Silicone Diaphragm, 200 μ m Nozzle

Typical Applica Ɵ ons: Silver Epoxies, Silicone Phosphor, Under ‐ Fill, UV Cure.

TS920 Jet Valve Controller

The TS920 is a smart controller for the TS9200D Jet Tech valve. It is designed with a powerful single board computer and LCD display. Dispensing parameters needed to control the TS9200D Jet Tech valve can be easily set from the front panel keys. Recipes ‐ six independent dispensing recipes can be programmed using the front panel keys or using the Jet Tech So Ō ware and downloaded into memory. Once programmed, the Jet valve can be triggered manually, from a host robot, or from a PC using the RS ‐ 232 interface. Speci fi ca Ɵ ons Size: (WxDxH): 254mm x 323.3mm x 152.4mm. Weight : 3.2kg Speed: Up to 300Hz Continuous Duty Refill Time: 0.1ms resolution - Dwell Time: 0.1ms resolution Number of Drops: 1 to 1 Million Programmable Recipes: 6 Independent, Manual or Remote Nozzle Heater: Heating to 70°C, PID Control, Auto-tuning, Shut off timer

1st Drop Compensation: 2 levels with program. time interval Controller Interface: RS-232 & LCD Display with Keypad Input/Output: TTL Level Triggers Operating Temp: 10 to 50°C Input Power: 100, 115, 230 VAC

TS9200D Jet Controller

Part Code



Jet Valve Controller

75 +44 (0) 1908 686660

Made with FlippingBook - professional solution for displaying marketing and sales documents online