Adhesive Dispensing Ltd Product Catalogue

Adhesives

Threadlocker Anaerobic Adhesives

Anaerobic sealants adhesives are single component materials that cure by the presence of metal and the absence of air. When both condi Ɵ ons are met anaerobic adhesives form a tough, durable polymer providing total contact between the two surfaces, resul Ɵ ng in a vibra Ɵ on and leak ‐ proof assembly.

Low Strength Screwlocker

Mid Strength Screwlocker

High Strength Threadlock

Low Viscosity Studlocker

Colour: Green Viscosity: 500 cps

Colour: Purple Viscosity: 1,200 ‐ 1,500 cps Temp. Range:  ‐ 50 to 150 C Fixture Time: < 15 mins @ 20 Full Cure: 24 Hours @ 20 Size Part Code 50ml A02 ‐ 50 250ml A02 ‐ 250 10ml A02 ‐ 10

Colour: Blue Viscosity: 1,200 ‐ 1,500 cps Temp. Range:  ‐ 50 to 150 C Fixture Time: 10mins @ 20 Full Cure: 24 Hours @ 20 Size Part Code 50ml A03 ‐ 50 250ml A03 ‐ 250 10ml A03 ‐ 10

Colour: Red Viscosity: 400 ‐ 600 cps Temp. Range:  ‐ 54 to 150 C Fixture Time: 15mins @ 20 Full Cure: 24 Hours @ 20

Temp. Range:  ‐ 50 to 150 C Fixture Time: 15mins @ 20 Full Cure: 24 Hours @ 20 Size Part Code 50ml A05 ‐ 50 250ml A05 ‐ 250 10ml A05 ‐ 10

Size

Part Code

50ml A06 ‐ 50 250ml A06 ‐ 250 10ml A06 ‐ 10

High Viscosity Threadlock

Fast Cure Nutlocker

High Strength Retainer

Mid Strength Retainer

Colour: Red Viscosity: 5,000 cps

Colour: Blue Viscosity: 2,000 cps

Colour: Green Viscosity: 7,000 cps

Colour: Yellow Viscosity: 1,500 cps

Temp. Range:  ‐ 50 to 150 C Fix Time: 15 ‐ 30mins @ 20 Full Cure: 24 Hours @ 20

Temp. Range:  ‐ 50 to 150 C Fixture Time: 10mins @ 20 Full Cure: 24 Hours @ 20

Temp. Range:  ‐ 50 to 150 C Fixture Time: 20mins @ 20 Full Cure: 24 Hours @ 20 Size Part Code

Temp. Range:  ‐ 50 to 150 C Fixture Time: 10mins @ 20 Full Cure: 24 Hours @ 20 Size Part Code

Size

Part Code

Size

Part Code

50ml A07 ‐ 50 250ml A07 ‐ 250 10ml A07 ‐ 10

50ml A11 ‐ 50 250ml A11 ‐ 250 10ml A11 ‐ 10

50ml A14 ‐ 50 250ml A14 ‐ 250 10ml A14 ‐ 10

50ml A08 ‐ 50 250ml A08 ‐ 250 10ml A08 ‐ 10

Low Viscosity Retainer

Penetra Ɵ ng Threadlock Colour: Green Viscosity: 2,500 cps Temp. Range:  ‐ 50 to 200 C Fixture Time: 15mins @ 20 Full Cure: 24 Hours @ 20 Size Part Code 50ml A90 ‐ 50 250ml A90 ‐ 250 10ml A90 ‐ 10

High Strength Retainer

High Temp Gasket Maker

Colour: Green Viscosity: 150 cps

Colour: Green Viscosity: 500 cps

Colour: Red Viscosity: 2,500 cps

Temp. Range:  ‐ 50 to 200 C Fixture Time: 15mins @ 20 Full Cure: 24 Hours @ 20

Temp. Range:  ‐ 50 to 150 C Fixture Time: 15mins @ 20 Full Cure: 24 Hours @ 20

Temp. Range:  ‐ 54 to 200 C Fixture Time: 120mins @ 20 Full Cure: 24 Hours @ 20

Size

Part Code

Size

Part Code

Size

Part Code

Industrial Adhesives

50ml A01 ‐ 50 250ml A01 ‐ 250 10ml A01 ‐ 10

50ml A48 ‐ 50 250ml A48 ‐ 250 10ml A48 ‐ 10

50ml G10 ‐ 50 250ml G10 ‐ 250 10ml G10 ‐ 10

High Viscosity Gasket

Hydraulic Thread Sealant

High Temp Pipe Sealant Colour: White Viscosity: 50,000 cps Temp. Range:  ‐ 50 to 200 C Fixture Time: 75 mins @ 20 Full Cure: 24 Hours @ 20 Size Part Code 50ml P72 ‐ 50 250ml P72 ‐ 250 10ml P72 ‐ 10

Fast Cure Pipe Sealant

Colour: Orange Viscosity: 10,000 cps

Colour: Brown Viscosity: 2,000 cps

Colour: Yellow Viscosity: 100,000 cps Temp. Range:  ‐ 50 to 150 C Fixture Time: 30 mins @ 20 Full Cure: 24 Hours @ 20

Temp. Range:  ‐ 50 to 150 C Fixture Time: 60mins @ 20 Full Cure: 24 Hours @ 20

Temp. Range:  ‐ 50 to 150 C Fixture Time: 60 mins @ 20 Full Cure: 24 Hours @ 20 Size Part Code 50ml H42 ‐ 50 250ml H42 ‐ 250 10ml H42 ‐ 10

Size

Part Code

Size

Part Code

50ml G74 ‐ 50 250ml G74 ‐ 250 10ml G74 ‐ 10

50ml P77 ‐ 50 250ml P77 ‐ 250 10ml P77 ‐ 10

This accomplished range of anaerobics contains thread ‐ lockers, thread ‐ sealers, retainers and pipe ‐ sealants. The word "anaerobic" means without air which explains the primary cure mechanism of this group of adhesives. An anaerobic adhesive is a single part adhesive that cures or polymerizes when deprived of oxygen. Anaerobics are designed to lock and seal metal components and fasteners and are available in a range of thicknesses, from thin water to a heavy paste. The use of primers will signi fi cantly reduce the fi x Ɵ mes. For controlled dispensing of these products, use our Ɵ med syringe dispensers, meter ‐ ing valves, controllers and pressure pots.

90

www.adhesivedispensing.co.uk sales@adhesivedispensing.co.uk +44 (0) 1908 686660