Adhesive Dispensing Ltd Product Catalogue

Jet valves

Jet Tech Hot Melt Valve  ‐ TS9300HM Series

TS9300HM Hot Melt Jet Tech Valve Series are easy to clean valves that provide je ƫ ng temperatures up to 150°C while keeping the jet actuator below 55°C. The TS9300HM Valve Series features: • An easily replaceable single diaphragm which eliminates dynamic fl uid seals common in other jet valves. • An isolated je ƫ ng mechanism that ensures fl uids are contamina Ɵ on ‐ free. • Dual temperature controllers for the jet and the heater which allow the nozzle to be heated to op Ɵ mum je ƫ ng temperatures while keeping the PUR fl uid at reduced temperatures. • Line speeds up to 100mm/sec and nozzle sizes from 64 to 400 μ m. • Designed For Quick And Easy Cleaning The diaphragm design enables you to exchange syringes quickly and requires minimal cleaning. To eliminate having to clean residual PUR between the syringe and the jet, the TS9300HM has a ther ‐ mal jacket surrounding the high ‐ temperature feed tube so the syringe can easily be removed with the feed tube a Ʃ ached. The valve also includes a disposable feed tube so only the nozzle plate and diaphragm are in contact with the fl uid for quick and easy cleaning. TS930 Standalone Controller The stand ‐ alone TS930 Controller is available to help program the TS9300HM Hot Melt Jet Valve. The TS930 Controller has dual independent temperature controllers and dual independent power supplies for the jet and the heater along with precision air regulators and gauges to fi ne ‐ tune the je ƫ ng parameters. Six independent recipes can be input easily and stored using the fully program ‐ mable front panel on the TS930. Recipes can be triggered via a digital I/O connec Ɵ on for easy robot integra Ɵ on. TS9300HM Hot Melt Jet Valve applica Ɵ ons include: • Securely bonding components to circuit boards to protect against vibra Ɵ on. • Seal the housing of mobile devices to protect from moisture. Part Numbers For The TS9300HM Series Hot Melt Jet Valve Series: • TS9300HM ‐ SCD Hot Melt Jet valve with Silicone Carbide Diaphragm (nozzle not included) • TS9300HM ‐ SSD Hot Melt Jet valve with Silicone Stainless Steel Diaphragm (nozzle not included) • TS9300HM ‐ VCD Hot Melt Jet valve with Viton Carbide Diaphragm (nozzle not included)

Key Features Hot melt dispensing up to 150°C No fl uid seals to clean or replace Disposable feed tube for easy cleanup Separate nozzle and fl uid heater Outstanding repeatability Viscosity range up to 7K cps at 100°C Tungsten carbide nozzle for long life Quick and simple maintenance

• TS930 Controller Specifications Size Width:

61.6mm (2.43") 113.3mm (4.46") 191.1mm (7.52")

Dispensing Valves Size Depth: Size Height:

Weight: Speed:

0.91kg (2 lb)

Up to 200Hz Continuous Duty

Syringe Capacity: Viscosity Range: Fluid Pressure:

30cc

Up to 7K Mpa.s (cps) @ 100ºC

TS9200D Jet Controller

0.50 Mpa (75 PSI) Max. Carbide Nozzle Sizes: 64µm, 75µm, 100µm, 125µm, 150µm, 200µm, 300µm, 400µm Nozzle Heater: Heating up to 150ºC Max Fluid Heater: Heating up to 150ºC Max. Jet Pressure: 0.2 Mpa (30 PSI) Min. 0.5 Mpa (75 PSI) Max. Controller Interface: LCD Display w/ Interface, RS-232 Input / Output: TTL level triggers The TS9300HM Series Hot Melt Jet Tech Valve is available in the following con fi gura Ɵ ons: • TS9300HM ‐ SCD  ‐ Hot Melt Jet Valve with Silicone Carbide Diaphragm (nozzle not included) • TS9300HM ‐ SSD  ‐ Hot Melt Jet valve with Silicone Stainless Steel Diaphragm (nozzle not included) • TS9300HM ‐ VCD  ‐ Hot Melt Jet valve with Viton Carbide Diaphragm (nozzle not included) • TS930  ‐ Controller

The TS9300HM Hot Melt Jet Tech Valve can be used in wide range of applica Ɵ ons: ‐ Bonding components onto circuit board to protect against vibra Ɵ on ‐ Sealing mobile device housings to protect from moisture.

74

www.adhesivedispensing.co.uk sales@adhesivedispensing.co.uk +44 (0) 1908 686660