Adhesive Dispensing Ltd Product Catalogue

Metering valves

Manual Hand Operated Pinch Tube Valve

Hand operated valve for applying low to medium viscosity fl uids as cyanoacrylates, solvents, UV cure, anaerobic, primer and ac Ɵ vators. Maintenance free replaceable tubes. Takes a direct feed of fl uid from a syringe, cartridge or pressure pot.

Part Code Typical Applica Ɵ ons: UV, Cyanoacrylates, solvents, threadlockers, glues, inks. Length: 122.4mm Width: 36.3mm Max Pressure: 60psi Viscosity: 1-45k cps Inlet: Female Luer Outlet: Male Luer Wetted Parts: Polyethylene Hand Operated Applicator Type TS1201 TS1201 ‐ 1 TS1201 ‐ 2 Full boxed kit, clear/ black fl uid lines Valve only, white tube, no fl uid lines Valve only, black tube, no fl uid lines

Replacement Pinch Tubes for TS1201 Hand Valve

Replacement pinch tubes for the TS1201 manual valves. Easy to replace, these tubes are supplied in packs of 10. Either natural for most materials or black opaque for when dispensing UV cure adhesives. TS1201 pinch tubes are the longer version below.

Part Code

Type

1201 ‐ 000 ‐ 004PK 1201 ‐ 000 ‐ 005PK 1201 ‐ 000 ‐ 006PK 1201 ‐ 006 ‐ 000PK 1201 ‐ 000 ‐ 004BPK

Natural, PE, 0.100” ID, Male to Female Luer Natural, PE, 0.100” ID, Male to Male Luer Natural, PE, 0.070” ID, Male to Female Luer Natural, PU, 0.125” ID, Male to Female Luer Black, PE, 0.100” ID, Male to Female Luer

Manual Hand Operated Pinch Tube Wand

Typical Applica Ɵ ons: Solder mask, anaerobics, glues, inks. This manual dispensing wand has a fl exible silicone pinch tube and is excellent for solder masks and other fl owable materials. We do not recommend using it with cyanoacrylate (CA) glues however. The wand requires 50 psi or less to dispense fl uids. The front of the wand has a luer lock female fi ƫ ng, allowing use of any size dispensing Ɵ p. Part Code Type ADMPW Full boxed kit, clear pinch tube, luer fi ƫ ng AD1013R Pinch tube replacement, clear (per Ō ) AD2601 ‐ 4L White needle adapter luer fi ƫ ng Length: 170.9mm Width: 16.0mm Max Pressure: 50psi Viscosity: 1-40k cps

Inlet:

Female Luer

Hand Operated Applicator

Outlet: Male Luer Wetted Parts: Polyethylene

Dispensing Valves

Air Operated Pinch Tube Valve

Air operated pinch tube valve. Operates from a dispenser/ controller for Ɵ med deposits or beads of most low to medium viscosity fl uids. For UV Cure, cyanoacrylates, threadlocker, glue, epoxy, solvents and ac Ɵ vators. Single ac Ɵ ng valve  ‐ air open and spring

Typical Applica Ɵ ons: Cyanoacrylates, UV cure, Anaerobics, 2 ‐ part epoxies, solvents, glues.

Part Code

Type

Length: Width:

83mm

TS1212

Full boxed kit, clear/ black fl uid lines

40mm Max Pressure: 60psi Viscosity:

Air Operated Applicator

1-45k cps

Inlet:

Female Luer

Outlet: Male Luer Wetted Parts: Polyethylene

Replacement Pinch Tubes for TS1212 Air Operated Valve

Replacement pinch tubes for the TS1212 manual valves. Easy to replace, these tubes are supplied in packs of 10. Either natural for most materials or black opaque for when dispensing UV cure adhesives. TS1212 pinch tubes are the shorter version below.

Part Code

Type

1212 ‐ 004 ‐ 002PK 1212 ‐ 004 ‐ 200PK 1212 ‐ 004 ‐ 000PK 1212 ‐ 004 ‐ 100PK 1212 ‐ 004 ‐ 003PK 1212 ‐ 004 ‐ 002BPK 1212 ‐ 004 ‐ 100BPK

Natural, PE, 0.100” ID, Male to Female Luer Natural, PU, 0.125” ID, Male to Male Luer Natural, PE, 0.070” ID, Male to Female Luer Natural, PU, 0.125” ID, Male to Female Luer Natural, PU, 0.100” ID, Male to Female Luer Black, PE, 0.100” ID, Male to Female Luer Black, PE, 0.125” ID, Male to Female Luer

64

www.adhesivedispensing.co.uk sales@adhesivedispensing.co.uk +44 (0) 1908 686660

Made with FlippingBook flipbook maker