Adhesive Dispensing Ltd Product Catalogue

Metering valves

Precision valves will dispense accurate deposits with liquid fed under pressure from syringe barrels, cartridges or pressure pots. Valves operate with minimal maintenance, ensuring clean and accurate dispensing whether used by hand, to feed parts on a produc Ɵ on line or if fi xed onto an XYZ robot. Hand lever, air operated or motor driven valves. Manual Hand Operated Needle Valve Hand held needle valve for precise beads applica Ɵ ons of low to medium viscosity fl uids. The hand lever opens the needle allowing fl uids to fl ow; when it is released the needle closes. Doesn't require the use of a Ɵ me/pressure dispenser. Direct fl uid feed from a pressure pot, cartridge reservoir or syringe. Low cost solu Ɵ on for making controlled beads.

Length: Width:

150mm

Hand Operated Applicator

18mm Max Pressure: 60psi Viscosity:

Part Code ADL2030

Type

1-30k cps 6mm OD

Inlet:

Boxed, with clear tubing

Outlet: Male Luer Wetted Parts: Steel, Aluminium

Typical Applica Ɵ ons: UV cure, primers, solvents, inks, lubricants, resins.

Manual Hand Operated Needle Valve

Part Code ADL2035 Hand held needle valve for precise beads applica Ɵ ons of low to medium viscosity fl uids. The hand lever opens the needle allow ‐ ing fl uids to fl ow; when it is released the needle closes. Doesn't require the use of a Ɵ me/pressure dispenser. Direct fl uid feed from a pressure pot, cartridge reservoir or syringe. Low cost solu Ɵ on for making controlled beads. Length: 150mm Width: 22mm Max Pressure: 100psi Viscosity: 1-40k cps Inlet: 6mm OD Outlet: Male Luer Wetted Parts: Steel, Aluminium Type Boxed, with clear tubing Hand Operated Applicator Typical Applica Ɵ ons: UV cure, primers, solvents, inks, lubricants, resins.

Dispensing Valves

Manual Hand Operated Needle Valve

Hand held needle valve for precise beads applica Ɵ ons of low to medium viscosity fl uids. The hand lever opens the needle allowing fl uids to fl ow; when it is released the needle closes. Doesn't require the use of a Ɵ me/pressure dispenser. Direct fl uid feed from a pressure pot, cartridge reservoir or syringe. Low cost solu Ɵ on for making controlled beads.

Length: Width:

159mm

Hand Operated Applicator

25mm Max Pressure: 60psi Viscosity:

Part Code ADL2020

Type

1-25k cps 6mm OD

Inlet:

Boxed, with clear tubing

Outlet: Male Luer Wetted Parts: Steel, Aluminium

Typical Applica Ɵ ons: UV cure, primers, solvents, inks, lubricants, resins.

Manual Hand Operated Diaphragm Valve

Hand operated diaphragm valves for low to medium viscosity fl uids such as cyanoacrylates, solvents, inks, UV cure, anaerobic, primers and ac Ɵ vators. Takes a direct feed of fl uid from a syringe, cartridge or pressure pot. UHMW/ Te fl on for Cyanoacrylates, Delrin for UV cure.

Length: Width:

99.1mm

Typical Applica Ɵ ons: UV cure, Cyanoacrylates, solvents, threadlockers, glues, inks.

26.9mm Max Pressure: 100psi Viscosity: 1-50k cps Inlet:

Part Code TS5623HU TS5623HD TS5623HT

We Ʃ ed Parts

UHMW Delrin Te fl on

Female Luer

Outlet: Male Luer Wetted Parts: UHMW/ Teflon/ Delrin

Hand Operated Applicator

Manual Hand Operated Diaphragm Valve

Hand operated diaphragm disc valve for the applica Ɵ on of low to medium viscosity fl uids such as cyanoacrylates, solvents, inks, UV cure, anaerobic, primers and ac Ɵ vators. Takes a direct feed of fl uid from a syringe, cartridge or pressure pot.

Length: Width:

159mm

Typical Applica Ɵ ons: UV cure, Cyanoacrylates, solvents, threadlockers, glues, inks.

45mm Max Pressure: 50psi Viscosity:

Hand Operated Applicator

1-5k cps

Inlet:

1/8” Thread Male Luer

Part Code

We Ʃ ed Parts

Outlet:

ADL ‐ 200CAM

Te fl on

Wetted Parts: PTFE

63

www.adhesivedispensing.co.uk sales@adhesivedispensing.co.uk +44 (0) 1908 686660