Adhesive Dispensing Catalogue

Valve systems

Stainless steel double air acƟvated dispense valve for mixing two part materials such as epoxies, sili- cones and polyurethanes. Part A and Part B are fed under pressure to the valve, it delivers them into the staƟc mixer nozzle where they are mixed. This valve mixes raƟos 3:1 or under. Adjustable.

Min Shot: 0.01ml Length: 115mm

Epoxy Mixing Valve

Width: 35mm Weight: 418g

Part Code

WeƩed Parts

AD324D

304 Stainless Steel

Typical ApplicaƟons:

Rapid dots or controlled beads of 2-part materials less than 3:1 mix raƟo such as epoxies, silicones and PU’s.

Stainless steel double air acƟvated dispense valve for mixing two part materials such as epoxies, silicones and polyurethanes. Part A and Part B are fed under pressure to the valve, it delivers them into the staƟc mixer nozzle where they are mixed. This valve mixes raƟos 2:1 or under. Adjustable.

Min Shot: 0.01ml Length: 160mm

Epoxy Mixing Valve

Width: 40mm Weight: 235g

Part Code

WeƩed Parts

AD1919

304 Stainless Steel

Typical ApplicaƟons:

Rapid dots or controlled beads of 2-part materials less than 2:1 mix raƟo such as epoxies, silicones and PU’s.

Stainless steel double air acƟvated dispense valve for medium viscosity pastes and gels. Adjustable flow control stroke. A reliable double acƟng valve, requires air pulse to open and air pulse to close. Use the dispensing controller part VCE1195N . Stainless steel weƩed parts. 1/4” threaded inlet.

Min Shot: 0.01ml Length: 160mm

Paste Dispensing Valve

Width: 40mm Weight: 235g

Part Code

WeƩed Parts

Typical ApplicaƟons:

AD3075

304 Stainless Steel

Fast repeat dots of pastes, gels and liquids. Up to 600 shots per minute.

16

www.adhesivedispensing.co.uk