Adhesive Dispensing Catalogue 2010

Peristaltic pump dispensers transfer low viscosity liquids by pressure displacement applied by a turn- ing rotor against a PTFE tube carrying the material. Usually these useful pumps are selected because the liquids might be hazardous or difficult to work with where it is preferable to limit any operator ADL Dispensers Bench top dispensers for high levels of control and accuracy for use with most adhesives, coatings and fluids. Peristaltic Pump Dispenser DISP5600 Peristaltic Pump Dispenser PPD25-1 25 Gauge Teflon Tube per metre PPD19-1 19 Gauge Teflon Tube per metre

exposure. Another reason is that peristaltic pumps are completely air free. The ADL-DISP5600 peristaltic pump is a type of positive displacement dispensing machine used for pumping a variety of materials. The fluid is contained within a flexible Teflon tube fitted inside a circular pump casing. The special rotor turns and compresses the flexible tube thus forcing the fluid to be pumped to move through the tube. There is no requirement for compressed air. Liquids are drawn direct from any bottles, cans, manufacturers bottles and along the supplied feed tubing. fatigue or error. By not using compressed air, moisture sensitive adhesives such as Cyanoacrylates will perform better and will not prematurely cure or frost in the bottles. This system is supplied with a full starter kit including PTFE Teflon tubing roll, needle tip kit selection box, user guide and full product manuals. And we'll assist with full technical support to ensure a quick setup.

Ultra Low maintenance design Simple to setup and operate No external air source required

Use for adhesives, Printing ink, Electrolyte, acids etc Suitable for small shots and continuous operation Adjustable rotor speed in volume 0-10 Self priming from bottle or jar For smaller volume dispensing at lower flow rates, Teflon tubing is used System operated by finger switch on holder or remotely from I/O connector at rear of unit Timer display counts down for dispense LED display for accurate readings

The ADL Model 810 is a cost-effective analogue dispenser. It’s light weight and compact size makes this the ideal bench top fluid dispensing solution for all your gluing, coating, solder paste application and most other materials Budget Analog Timed Dispenser ADL810 Analog Dispenser 0-100 psi

Small footprint takes up less space Integrated air pressure regulator Powerful vacuum suck back stops drips Timer for repeat deposits or beads 2 Year Warranty Footswitch activation Robust build and design

viscous or not. It’s simplified construction and operation makes it easy for even some- one that has never used a dispenser before. The unit comes with two modes; manual/ pre-set timer. Features vacuum suck-back to prevent drips of watery liquids. Supplied with a 2 year warranty.

Air-Powered Dispensers * Industrial Dispensing Components * Precision Dispense Valve Systems * XYZ Bench Robots Adhesives * Packaged Components * Techkits * RatioPacks * Hingepacks * Syringe Barrels * Cartridges * Nozzles

Page 6