Adhesive Dispensing Catalogue 2010

Pressure Pots Tanks and pressure pots in a range of sizes for controlled feed of adhesives and liquids to all dispense valves.

3.8 Liter Pressure Pots TS1260

Pressure Pot 3.8 Liter 0-60psi regulator and gauge The TS1260 Pressure Pot is designed to accommodate most low to medium fluids,

adhesives, solvents and UV's. Pot accommodates 1/4" OD feed tubing with stainless steel compression fittings for a con- tinuous fluid path from the reservoir inside the pot to the metering valve. Airtight seals ensure no leakage problems. Built in adjustable 60 psi air regulator and gauge. Wide open mouth for easy access. Handles fluid viscosity up to 40,000 cps. Air port quick connect fitting and top ported outlet. Type 304 stainless steel.

5 Liter Pressure Pots TS2250

5 Liter Pressure Pots High Pressure TS1258 Pressure Pot 5 Liter 0-100psi regulator and gauge The TS1258 Pressure Pot (high pressure up to 100 psi) is designed to accommodate all solvents and adhesives, as well as cyanoacrylates and UV's. It will also accommodate black fittings and tubing in 1/4 , 3/8 , and 4 mm, with stainless steel compression fit- tings for a continuous fluid path from the reservoir inside the pot to the point of use. Airtight seals ensure no leakage or air entrapment problems. 100 psi operating pres- sure easily handles fluid with viscosity up to 50,000 CPS. Disposable polyethylene dip tube can be quickly changed. The pressure gauge and pressure regulator are located on top for easy reading and access. Includes 1/4" and 3/8" fluid line connector kits. All of our tanks are CE certified and supplied ready for use with a selection of fittings and fluid lines. Please specify a particular size tube or fitting type and time of order or select from our catalogue or website. Low level electric sensor The TS2250 Pressure Pot (pressure up to 75 psi) is designed to accommodate all solvents and adhesives, as well as cyanoacrylates and UV's. It will also accommodate clear and black fittings and tubing in 1/4 , 3/8 , and 4 mm, with stainless steel compression fittings for a continuous fluid path from the reservoir inside the pot to the point of use. Airtight seals ensure no leakage or air entrapment problems. 75 psi operating pressure easily handles fluid with viscosity up to 35,000 CPS. Disposable polyethylene dip tube can be quickly changed. The pressure gauge and pressure regulator are located on top for easy reading and access. Includes 1/4" and 3/8" fluid line connector kits. When dispensing adhesives, a container or bottle must be placed inside the tank chamber. Do not pour adhesives directly into the pot. Main tank body is stainless steel and the lid is aluminium. Pressure Pot 5 Liter 0-75 psi regulator and gauge TS22LS

Air-Powered Dispensers * Industrial Dispensing Components * Precision Dispense Valve Systems * XYZ Bench Robots Adhesives * Packaged Components * Techkits * RatioPacks * Hingepacks * Syringe Barrels * Cartridges * Nozzles

Page 12

Made with FlippingBook - Online Brochure Maker