Adhesive Dispensing Catalogue 2010

Pressure Pots Tanks and pressure pots in a range of sizes for controlled feed of adhesives and liquids to all dispense valves. 500 Gram Cyanoacrylate Pressure Pots TS1205 Pressure Pot 500 gram no regulator TS1215 Pressure Pot 500 gram 0-60 psi regulator/gauge Pressure pots for cyanoacrylates, UV's, anaerobics and other low

to medium viscosity fluids. No pouring needed; you just drop the bottle right into the tank, seal with wing nuts, and pressurise. Includes an air port to pressurize the tank, and a pop- off valve set at around 75 psi for safety. Accepts adhesive bottles 250gm and 500gm or other containers placed inside the chamber. Comes with 1/4" OD tubing kit as well as a 1/8" connector with dip tube for use with standard fluid lines. Easy connect to any adjustable air regulator with 6mm quick fitting. TS1215 includes gauge. 0.5 Litre Pressure Pots TS2205 Pressure Pot 0.5 Liter 0-75 psi regulator and gauge

Pressure Pot (pressure up to 75 psi) is designed to handle all solvents and adhesives, as well as cyanoacrylates and UV's. It will also accommodate clear and black fittings and tubing in 1/4 , 3/8 , and 4 mm, with stainless steel compression fittings for a continuous fluid path from the reservoir in- side the pot to the point of use. Airtight seals ensure no leakage or air entrapment problems. 75 psi operating pressure easily handles fluid with viscosity up to 35,000 CPS. Disposable polyethylene dip tube can be quickly changed. The pressure gauge and pressure regulator are located on top for easy reading and access. Includes 1/4" and 3/8" fluid line connector kits. When dispensing adhesives, a container or bottle must be placed inside the tank chamber. Do not pour adhesives directly into the pot. Main tank body is stainless steel and the lid is aluminium.

1 Liter Pressure Pots TS1251

Pressure Pot 1 Liter no regulator TS1251R Pressure Pot 1 Liter 0-60psi regulator/ gauge

2 Liter Pressure Pots TS2220 TS22LS Low level electric sensor Pressure Pot (pressure up to 75 psi) is designed to handle all solvents and adhesives. It will also accom- modate clear and black fittings and tubing in 1/4 , 3/8 , and 4 mm, with stainless steel compression fit- tings for a continuous fluid path from the reservoir inside the pot to the point of use. Airtight seals ensure no leakage or air entrapment problems. 75 psi operating pressure easily handles fluid with viscosity up to 35,000 CPS. Optional low level electric sensor available. Air-Powered Dispensers * Industrial Dispensing Components * Precision Dispense Valve Systems * XYZ Bench Robots Adhesives * Packaged Components * Techkits * RatioPacks * Hingepacks * Syringe Barrels * Cartridges * Nozzles The TS1251 pressure pot (max pressure 60 psi) is designed to accommodate all solvent and epoxy fluids, as well as cyanoacrylates and UV's. Pot accommodates 1/4" OD feed tubing with stainless steel compression fittings for a continuous fluid path from the reservoir inside the pot to the metering valve. Also supplied with a 1/8" male luer lock fitting to accept our standard fluid lines. Airtight seals ensure no leakage or air entrapment problems. Ideal for use with bottles of cyanoacrylate and an- aerobic adhesives. 60 psi safety pressure easily handles fluid with viscosity up to 25,000 cps. Air port quick connect fitting and top ported outlet. Also accepts adhesive bottles 250gm and 500gm. Easy connect with 6mm push fit to any adjustable air regulator. Black and silver anodised aluminium. Page 11 Pressure Pot 2 Liter 0-75 psi regulator and gauge