ADL-DISP5600 PERISTALTIC PUMP DISPENSER DATA

ADL-DISP5600 PERISTALTIC PUMP DISPENSER DATA SHEET

Peristaltic pump dispensers transfer low viscosity liquids by pressure displacement applied by a turning rotor against a soft PTFE tube carrying the material. Usually these pumps are selected because the liquids might be hazardous or difficult to work with where it is preferable to limit any operator exposure. Another reason is that peristaltic pumps are completely air free. The DISP5600 peristaltic pump is a type of positive displace ment dispensing machine used for pumping a variety of materi als, especially Cyanoacrylate adhesives. The fluid is contained within a flexible PTFE Teflon tube fitted inside a circular pump casing. The special rotor turns and compresses the flexible tube thus forcing the fluid to be pumped to move through the tube. The digital timer allows you to dispense accurate and repeated amounts of fluid every time. The pumped fluid contacts only the inside surface of the tubing. There are no other valves, O-rings, seals or packing's to worry about in a peristaltic pump so it is zero maintenance. No requirement for compressed air allows for setup in any location.

Liquids are drawn direct from any bottles, cans, manufacturers packaging and pulled along the supplied feed tubing without fatigue or error. By not using compressed air, moisture sensitive adhesives such as Cyanoacrylate will perform better and will not prematurely cure or frost in the bottles. With the digital timer, adjustment can be made to the deposit size from repeat micro dots to larger volume shots. With the timer off, controlled beads can be made. A reverse mode at the end of each cycle pulls liquid back into the nozzle tip, preventing drips and oozing. By running reverse direction on steady mode, all liquid can be put back into the bottle and clearing the tube. This system is supplied with a full starter kit including PTFE tubing roll, PTFE tip kit selection box, user guide and product manuals.

FEATURES • Easy installation and operation • Ultra-minute shot sizes possible • Manual or Timer controlled shot size • Dispense material directly from bottle or can - no need to load barrels • Foot pedal connector can be for integration with XYZ systems or other equipment • Suck-Back feature prevents material from dripping between cycles • Patented rotor design for longer tube life • Variable pump speed permits adjustment of the flow rate • Reversible pump allows material lines to be emptied when work is complete • Simple maintenance and no “clean up” • Effectively dispenses materials such as Cyanoacrylates, UV Cure Adhesives, Fluxes, Solvents, Oils, Paints, Activators

SPECIFICATION Type:

Peristaltic Pump Dispenser

Model:

ADL-DISP5600B 0.01 - 99.99 sec 0- 120 rpm (max.) Over 1.5kg / cm2

Timer range: Rotor Speed:

Dispense Pressure: Direction of Pump:

Both direction (Forward / Reverse)

Power Source: Dimensions:

AC 220V/110V, 50/60Hz 177mm x 169.5mm x 83mm

Weight:

3.5kg

Approvals:

CE

Commodity Code:

90289090

Brand:

Adhesive Dispensing Ltd

www.adhesivedispensing.co.uk orders@adhesivedispensing.com +44 (0) 1908 686660

ADL-DISP5600 PERISTALTIC PUMP DISPENSER DATA SHEET

PTFE TUBING

Gauge Size

Tube ID 2.69mm 2.41mm 2.40mm 2.16mm 1.93mm 1.68mm 1.34mm 1.17mm 1.07mm 0.96mm 1.00mm 0.81mm 0.71mm 0.66mm 0.56mm 0.46mm 0.38mm 0.30mm

Tube OD

Material

Colour

Length

Part Code

3.29mm 3.01mm 3.00mm 2.76mm 2.54mm 2.23mm 1.94mm 1.79mm 1.67mm 1.56mm 1.50mm 1.31mm 1.21mm 1.16mm 1.06mm 0.86mm 0.78mm 0.70mm

PTFE PTFE PTFE PTFE PTFE PTFE PTFE PTFE PTFE PTFE PTFE PTFE PTFE PTFE PTFE PTFE PTFE PTFE

White White White White White White White White White White White White White White White White White White

Per 10 Metre Per 10 Metre Per 10 Metre Per 10 Metre Per 10 Metre Per 10 Metre Per 10 Metre Per 10 Metre Per 10 Metre Per 10 Metre Per 10 Metre Per 10 Metre Per 10 Metre Per 10 Metre Per 10 Metre Per 10 Metre Per 10 Metre Per 10 Metre

TT-10G TT-11G TT-12G TT-13G TT-14G TT-15G TT-16G TT-17G TT-18G TT-19G TT-20G TT-21G TT-22G TT-23G TT-24G TT-26G TT-28G TT-30G

10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 26 28 30

Scan Code for User Guide

FEATURES Reduces hand fatigue - motor driven Digital timer for highly accurate repeat shots Reduces inconsistency - less fluid waste Eliminate guesswork - faster output Precision RPM for accurate flow control Applies watery liquids and adhesives Robust build and design with 1 year cover Supplied with dispensing tip and tube kit

www.adhesivedispensing.co.uk orders@adhesivedispensing.com +44 (0) 1908 686660

PTFE Lined Crimped Tips Colour Coded Plastic Luer Lock Hub to Soft Teflon Tube Inside Tip

PTFE Series Crimped Tube Tips Straight or Angled Material:

Polypropylene, PTFE, Stainless Steel

Tube Lengths: Attachment: Flow Pattern:

0.25” - 6.35mm, 0.50” - 12.70mm, 1.0” - 25.4mm

Luer Lock Thread (Double-Helix) Straight Version or 45° Bend Version

Maximum Pressure:

100 PSI

Pack Size:

50 Pieces or 1000 Pieces Industrial Grade, Silicone Free

Details:

Commodity Code:

90289090

Brand:

Adhesive Dispensing Ltd

Our PTFE lined crimped tube dispensing tips feature a rigid, stainless steel tube bonded to a threaded, colour-coded polypropylene luer lock hub. The PTFE tube is crimped inside the stainless steel tube. This provides a durable tip connection ensures secure attachment to syringe barrels or dispensing valves, even under high pressure environments - up to 100 psi. Engineered for Cyanoacrylates and Reactive Fluids Ideal for low viscosity adhesives, PTFE crimped tips are specially designed to prevent clogging and crystallisation when dispensing Cyanoacrylates and other reactive liquids. The combination of soft PTFE tubing and polypropylene hubs resists chemical interaction, delivering consistent flow and extended tip life compared to standard needle-style dispensers. Precision in Every Dispense The PTFE soft tubing prevents scratching on sensitive substrates. The PTFE tube protrudes 1/8” out from the end of the stainless steel tube. Universal Compatibility Across Syringe Systems Our PTFE crimped tips are compatible with standard luer lock and luer slip syringe barrels and fittings. They perform reliably with a broad spectrum of fluids including instant adhesives, inks, primers, and activators. Certified silicone-free, these tips maintain purity and prevent contamination during sensitive dispensing applications. Key Features: ✔ PTFE Crimped Tube – Stops instant glues from rapid curing in the tip. ✔ Safety Locking Double Helix Hub – Secure, leak-free attachment with Luer-lock compatibility. Suitable for dispensing : Cyanoacrylate Adhesives

✔ Versatile Application – Compatible with syringe barrels, cartridges (using a tip adapter), and metering valves. ✔ Industrial Grade & Silicone-Free – Ensuring clean and precise dispensing for manufacturing and assembly applications. ✔ Reliable Performance. Designed to maintain consistent flow rates for all fluid types. ✔ A Range of Lengths. 0.25”, 0.50”, 1.0”, 1.0”, 1.5” ✔ Sealed Boxes. Ensures tips are received dust free and easy to stack. The PTFE lined tip range uses a double-helix luer lock thread attachment for a leak-free connection

Primers & Activators Flowable Silicones UV Cure Adhesives Marking Paints & Inks Lubricants & Grease

ADL brand TLC version

Gauge Size

Hub Colour

Connec Ɵ on

Flow Pa Ʃ ern Straight Straight Straight Straight Flow Pa Ʃ ern 45° Bend 45° Bend 45° Bend 45° Bend

0.25” Long 5114TLC-1/4 5121TLC-1/4 5125TLC-1/4 5127TLC-1/4

0.5 Long

1.0” Long 5114TLC-1 5121TLC-1 5125TLC-1 5127TLC-1

Tube ID 0.90mm 0.62mm 0.33mm 0.25mm Tube ID 0.90mm 0.62mm 0.33mm 0.25mm

Pack Size

Olive Grey Pink Red

Double-Helix Luer Lock Double-Helix Luer Lock Double-Helix Luer Lock Double-Helix Luer Lock

5114TLC-1/2 5121TLC-1/2 5125TLC-1/2 5127TLC-1/2

50 pcs or 1000 pcs 50 pcs or 1000 pcs 50 pcs or 1000 pcs 50 pcs or 1000 pcs

14 21 25 27

Gauge Size

Hub Colour

Connec Ɵ on

0.5 Long

1.0” Long

1.5” Long

Pack Size

Olive Grey Pink Red

Double-Helix Luer Lock Double-Helix Luer Lock Double-Helix Luer Lock Double-Helix Luer Lock

5114TLCS-45 5121TLCS-45 5125TLCS-45 51127LCS-45

5114TLC-1-45 5121TLC-1-45 5125TLC-1-45 5127TLC-1-45

5114TLC-15-45 5121TLC-15-45 5125TLC-15-45 5127TLC-15-45

50 pcs or 1000 pcs 50 pcs or 1000 pcs 50 pcs or 1000 pcs 50 pcs or 1000 pcs

14 21 25 27

TECHCON brand TLC version

Gauge Size

Hub Colour

Connec Ɵ on

Flow Pa Ʃ ern

0.5 Long

1.0” Long

1.5” Long

Tube ID 0.62mm 0.25mm

Pack Size

Straight Straight

Grey Pink

Double-Helix Luer Lock Double-Helix Luer Lock

5121TLCS-45 5125TLCS-45

5121TLC-1-45 5125TLC-1-45

5121TLC-15-45 5125TLC-15-45

50 pcs or 1000 pcs 50 pcs or 1000 pcs

21 25

For the full website range, click here

www.adhesivedispensing.co.uk orders@adhesivedispensing.com +44 (0) 1908 686660

Reasons to use our dispensing components Industrial grade - certified safe for use to 025 psi. Will not break when in use under pneumatic or mechanical pressure. Certified Silicone-Free . Our components will not contaminate fluids placed when in use including specialist adhesives. Burr-free . All blunt tips are electro-polished and produced to a high precision finish. Widest range - we stock millions of parts in many different styles and an extensive range of cartridges, nozzles, mixers. Fast lead times . Most products are held in stock and available within days not weeks. Boxed - most of our tips are supplied in sealed boxes for easy identification and protection against contamination. Batch codes - all labelled with batch codes for traceability. Expert support . We recommend our products to ensure our customers receive the right solution for their application.

Visit our growing customer tech knowledge base for more product information, data sheets, videos and advice. https://www.adhesivedispensing.net/kb_results.asp

Adhesive Dispensing Ltd 14 Clarke Road Milton Keynes Buckinghamshire, MK1 1LG, UK

Tel. +44 (0) 1908 686660 Fax. +44 (0) 1908 686836

orders@adhesivedispensing.com www.adhesivedispensing.co.uk

© 2026 Adhesive Dispensing Ltd

www.adhesivedispensing.co.uk