ADL-300 Rotary Table Dispenser

ADL-300 Digital Rotary Table

Specification: Cycle Initiation: Manual (Foot Pedal or Button) Vertical Travel: 2.00 Inch (50 mm) Rotation Speed: 0 - 60 rpm Air Input: 70-100 psi (5 - 7 bar) Air Output: 1-60 psi (0.1 - 4 bar) Dimensions (W x D x H): 215 x 310 x 85 mm

Key Features: Dispenses in circles from 0-900 Degree Adjustable Z-axis including tilt control Variable speed table Simple to set up and operate Fully programmable for perfect dispensing Set clockwise/ anti-clockwise spin LCD display for time, RPM

Machine Weight: 7 kg Meets or Exceeds: CE Commodity Code: 90282000 Brand: ADL

The ADL-300 is bench top rotary dispensing station for applying adhesives, fluids and pastes to circular components under 300mm in diameter. This rotary table provides an efficient method of dispensing a pattern onto circular products. The tilting Z-axis allows controlled rotary dispensing on an angle if required. The ADL-300 dispenses adhesives, silicones, grease and lubricants and is fully adjustable in rotation speed, circle diameter and dispensing time. Dispense from 30cc or 55cc sized barrels mounted on the Z-axis. The Z-axis tilt is easily adjusted to dispense either on a vertical wall within a cylindrical part or on an outside wall. The system will spin the part, index down and dispense to a required time. The head then indexes back into position after fluid is applied. The speed of index can be adjusted. A built-in vacuum suck- back is designed for watery liquids. This is a stand alone dispensing station. Supplied with 30cc and 55cc barrels, pistons, caps as well as a full precision tip kit. An adjustable vacuum provides suck-back to the tip to prevent watery liquids from dripping. We recommend the use of an inline filter on the air adapter to the syringe when dispensing low viscosity fluids. The display shows the timer which can be adjusted for repeat deposits, down to micro-dots. The display shows the RPM, the delay time from dispensing as the table turns and delay time after. This compact dispenser sits on the bench and requires an air input from any compressor or factory mains supply. It comes with airline hose and fittings kit to make connection easy. Ready to use out of the box. CE approved with 1 Year warranty. Dispensers require clean and dry compressed air from most small compressors, a mains factory air supply or nitrogen. We recommend the use of a 5 micron air filter on the supply air into the dispenser. This will reduce oil, moisture and particles from the air. No other maintenance is required as the dispenser applies liquid direct from a syringe barrel without being in direct contact with it.

www.adhesivedispensing.co.uk sales@adhesivedispensing.co.uk +44 (0) 1908 686660