AD110-20 20oz Dispenser Gun User Guide 24

SPECIFICATION AD110-20 USER GUIDE

The AD110-20 pneumatic cartridge gun dispenser provides many years of trouble-free, productive service. This Operating Guide will help support you maximize the usefulness of your new dispenser. Please spend a few minutes to become familiar with the opera tion and features of your new gun dispenser. Please follow our simple recommended advice. Review the information we have included in the guide based on our many years of industrial fluid dispensing experience. Most questions you will have are answered in this guide. Howev er, if you need assistance, please contact us or your authorised distributor. For support, call us on +44 (0) 1908 686660

Specification - Part Code: - Cartridge Size: - Maximum Thrust: - Barrel Length: - Pressure: - Air Inlet: - Gun Colour: - Tool Weight: - Barrel Material: - Handle Material:

AD110-20 20 Ounce

2.5kN 250mm

To 100 PSI Maximum 1/4 Inch BSP Male Thread

Black 1.95kg

Anodised Aluminium Base Moulding, (PC), (ABS) CE, REACH, RoHS

- Approval:

- Commodity Code:

90289090

GB

-Origin: - Brand:

Adhesive Dispensing Ltd

1 Year

- Warranty:

Initial Steps One : Unpack and check the product for no damages. If there is any discrepancy, please call us immediately. Two : Compressed air should be available where the gun is to be set up. Air pressure should be between 80 and 100 psi (5.5 and 6.9 bar). If you are not using an Adhesive Dispensing Ltd 5-micron filter regulator #TSD800-6, be certain your factory air is properly filtered and dry and a regulated, constant air pressure is supplied to the dispenser. Warning: Bottled nitrogen can be used. If high pressure bottled air or nitrogen is used, a high pressure regulator must be in stalled on the bottle and set at 100 psi maximum. Three : ACTIVATE your One Year Limited Warranty. Please fill in and return the Warranty card. Or if you prefer, call the appropri ate number listed below, provide the serial number on the back of your dispenser and respond to a few short questions. If required, please call our support team on +44 (0) 1908 686660 Our Promise We pledge that you will be completely satisfied with our range of dispensing products. We strive to ensure that every ADL prod uct is supplied to high quality standards. If you feel that you are not receiving the support you require, or if you have any questions or comments, please email or call us for an immediate response. Our goal is to provide high performance equipment and components, and to build long-term customer relationships based on excellent quality, service, value and trust.

www.adhesivedispensing.co.uk info@adhesivedispensers.co.uk +44 (0) 1908 686660