AD1001 Digital Timed Shot Dispenser UG 2024

AD1001 DIGITAL TIMED DISPENSER

AD1001

OPERATING MANUAL

1.0 CAUTIONS AND WARNINGS CAUTION : - EYE PROTECTION IS REQUIRED 1.0 WARNINGS : • Read the material safety data sheets to find out special precautions you must take while dispensing the specific material. • Wear protective safety equipment as specified in the material safety data sheets. • Check with the factory if you are not sure about dispensing materials and chemicals. • Adhesives can contain severe eye irritants and skin bonders. Immediate bonding of eyes, skin or mouth may occur upon contact. Some adhesives may also cause permanent eye damage. • Avoid eye, mouth and skin contact. Use full cover safety glasses. Avoid breathing adhesive vapours. Provide adequate ventilation or use fume extraction. • If eye becomes bonded, quickly soak it in warm water. Do not use excessive force to free bonded areas. • Before using flammable solvents, extinguish all open flames in the immediate work areas and observe proper precautionary measures for handling the material. • Due to the electronic nature of this equipment and the potential for a spark or generation of heat, note that this equipment most NOT be used with any explosive material or in an explosive type environment. 2.0 INTRODUCTION: The AD1001 advanced dispenser is a high-performance solution for precise and repeatable liquid and paste applications. Whether you’re working with watery liquids or high-viscosity pastes, the AD1001 ensures consistent results, making it ideal for assemblers & manufacturers involved in sticking, bonding, coating, sealing, and repairing. Dispensed amounts may be controlled manually or with the built-in timer. Maintenance and clean-up are simple because material never comes in contact with the dispensing mechanism. Use this dispenser with our certified industrial grade and silicone-free syringe barrels and dispensing tips.

3.0 SPECIFICATION: Timer:

4.0 ACCESSORIES & REPLACEMENTS

0.01 to 99.99 seconds adjustable

QUANTITY

DESCRIPTION

RE-ORDER PART CODE

Output Pressure: Input Pressure:

0- 100 psi 80-100 psi

1 1 1 1 1 1

Power Cord Adapter Barrel Bench Stand

585323-UK

TS100

Vacuum:

Venturi Suck-Back Adjustable

Air Input Hose Foot Switch Finger Switch

AD918-000-002S

Size:

220 x 210 x 67mm

7045-9020

Weight:

1.59kg

AD9012

Input Voltage: Warranty: Cycle Rate:

100-240 V AC 50/60 Hz

30cc/55cc Barrel Adapter 30cc Natural Barrel Pack 30cc White Wiper Piston Pack 30cc Orange End Cap Seal

AD73003RHB4

2 Years

50 50 50 50

AD930-N

Up to 600 cycles/minute

AD930-WW AD930-ECO AD900-ORTC

Timing Tolerances: Meets or Exceeds: Commodity Code:

+/- 0.1%

CE, RoHS, WEEE

Orange Tip Cap Seal

90282000

Brand:

Adhesive Dispensing Ltd

© 2024 Adhesive Dispensing Ltd.

www.adhesivedispensing.co.uk

sales@adhesivedispensing.co.uk

+44 (0) 1908 686660