1000T User Guide

Introduction

Thank you for purchasing the 1000T pneumatic timed syringe dispenser. Dispensing systems are supplied tested and are made using high quality parts to ensure that your time is spent where it belongs, on productivity. The 1000T will accept most airline feeds up to 100psi. You can use dispense most fluids such as solder paste, flux, silicone, RTV, grease, threadlockers and PVA using barrels and tips supplied in the box. This user guide will answer most of the more common questions and help you to maximise the benefits from your new 1000T fluid dispensing system. The 1000T is widely used in the electronics industry, aviation, automotive, food, medical device, aerospace, cosmetics, craft work, education, chemicals and general industry.

Dispensers can apply a range of deposits from a very small dot to large volumes - handling watery liquids to thick pastes.

To achieve maximum performance from Adhesive Dispensing equipment, please read the instructions carefully.

After completing this guide, please do not hesitate to contact the technical team at Adhesive Dispensing Ltd or contact your authorised Adhesive Dispensing Ltd reseller.

Tel. 00 44 845 652 0058 Fax. 00 44 845 652 0059