1000T Bench Dispenser User Guide

Introduction Thank you for purchasing our 1000T pneumatic timed syringe barrel dispenser. Our dispensing systems are supplied tested and are made using very high quality parts to ensure that your time is spent where it belongs, on productivity. The 1000T will accept most clean airline feeds up to 100 psi. You can use most fluids such as braze pastes, solder flux, RTV silicone, epoxy resins, grease, thread-lockers, PVA and many more materials using barrels and tips supplied in the box. This user guide will answer most of the more common questions and help you to maximise the benefits from your new 1000T flu id dispensing system. The 1000T is widely used by manufacturing companies in the engineering, electronics industry, aviation, automotive, food, medical device, aerospace, cosmetics, craft work, education, chemicals and general industry. Dispensers can apply a range of deposits from a very small dot to large volumes - handling watery liquids to thick pastes, from repeat and rapid dots to controlled beads, potting and gaskets. To achieve maximum performance from this equipment, please read the instructions carefully. After reading and completing this guide, please do not hesitate to contact the product specialist team at Adhesive Dispensing Ltd with any questions that you might have. Tel. +44 (0) 1908 686660 or +44 (0) 1908 686663 https://www.adhesivedispens ing .co.uk orders@adhesivedispensers.co.uk

2

www.adhesivedispensers.co.uk